Precautions, Location, Avoiding electric shock or fire – Fisher FVH-E420 User Manual

Page 2

Advertising
background image

PRECAUTIONS

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated “dangerous voltage” within the
product’s enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the product.

WARNING:

To reduce the risk of fire or electric

shock, do not expose this appliance to rain or
moisture.

CAUTION:

To prevent electric shock, match wide

blade of plug to wide slot of electrical outlet and
insert fully.

CAUTION:

Changes or modifications not expressly

approved by the manufacturer may void the user’s
authority to operate this VCR.

WARNING:

Unauthorized recording or use of

television broadcast, video tape, film or other
copyrighted material may violate applicable
copyright laws. The manufacturer assumes no
responsibility for unauthorized duplication, use or
other acts that infringe upon the rights of copyright
owners.

Location

For safe operation and satisfactory performance of your
VCR, keep the following in mind when selecting a place
for its installation:

œ

Shield it from direct sunlight and keep it away from
sources of intense heat.

œ

Avoid dusty or humid places.

œ

Avoid places with insufficient ventilation for proper heat
dissipation. Do not block the ventilation holes of the
VCR. Do not place the unit on a carpet because this
will block the ventilation holes.

œ

Install the VCR in a horizontal position only.

œ

Avoid locations subject to strong vibrations.

œ

Avoid moving the VCR between cold and hot locations
(see “Moisture Condensation Problems”, this page).

œ

Do not place the VCR directly on top of the TV, as this
may cause playback or recording problems.

Avoiding Electric Shock or Fire

œ

Do not handle the power cord with wet hands.

œ

Do not pull on the power cord when disconnecting it
from an AC wall outlet. Grasp it by the plug.

œ

If any liquid is spilled on the VCR, unplug the power
cord immediately and have the unit inspected at a
factory-authorized service center.

œ

Do not place anything directly on top of the VCR.

Model Number

: FVH-E420

Trade Name

: Fisher

Responsible party

: SANYO FISHER COMPANY

Address

: 21605 Plummer Street,

Chatsworth, California 91311

Telephone No.

: (818) 998-7322

œ

This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:

(1) this device may not cause harmful interference,

and

(2) this device must accept any interference

received, including interference that may cause
undesired operation.

Declaration of Conformity

Moisture Condensation Problems

Cause:

When the VCR is first installed, moved from a cold area
to a warm area or placed in a location with high humidity,
dew (moisture) may form inside the unit. If you operate
the VCR with dew inside, damage may result.

Prevention:

1

Make all necessary connections.

2

Plug the power cord into a 120 V AC wall outlet.

3

Turn on the power.

4

Do not operate the VCR or insert a cassette for
approximately 2 hours.

This allows the VCR to warm up to the temperature of the
room where it will be used.

This VCR has a Y/C filtering
technique incorporated under license
from Faroudja Laboratories Inc.

Technology licensed by

Laboratories Inc.

SC4/UF (FVH-E420 GB) Wed. Jan. 26/2000

1

Advertising