FUJITSU Image Scanner fi-4120C - Manual (Page 29)

1.4 How to Use the Scanner Driver
fi-4120C Image Scanner Operator’s Guide 13
BASIC SCANNER OPERA
T
IONS
1
Image Mode
Specifies the image type for the scanned documents.
[Scan] button
Starts scanning documents with the current settings.
[Preview] button
Documents are scanned preliminarily before the actual scanning.
You can confirm the image of the documents in the preview window.
[Close] button
Saves the current settings and closes this window.
[Reset] button
Used to undo changes of settings.
[Help] button
Opens the "FUJITSU TWAIN32 Scanner Driver Help" window. The window also
opens by pushing the [F1] key.
[About...] button
Opens an information window about the FUJITSU TWAIN32 Scanner Driver's ver-
sion.
[Option...] button
You can set up the details of optional functions on the window below.
Black & White Documents are scanned in binary (black and white).
Halftone Documents are scanned through halftone process-
ing in black and white.
Grayscale Documents are scanned with 256 gradations from
black to white.
Color Documents are scanned in color. For this mode, you
can select 24 bit Color, 256 Color or 8 Color.