Fishman Loudbox 100 - Manual (Page 9)

Rear Panel
Power Switch
Lower the master volume or engage the Mute switch before you turn on the amp. Flip the power switch to the up
position and it will light, indicating the amp is on.
AC Power
Operate the amplifier only at the voltage indicated in the check box on the rear panel.
For 120V amplifiers purchased in the USA, Canada and Mexico, plug in the supplied detachable
AC power cable.
For 230V amplifiers purchased outside the USA and Canada, you will need to supply your own detachable
AC cable. This cable must have an IEC-style 320 connector at one end, and a male AC plug appropriate for your
region at the other.
Fuse Holder
The fuse is located within the AC power receptacle on the back of the amp. Access the fuse compartment with a
small slotted screwdriver.
For 120V amplifiers purchased in the USA and Canada, replace the fuse with: LittelFuse ® type 218002 or equivalent
5 x 20 mm, 2A, 250V, time-delay fuse.
For 230V amplifiers purchased outside the USA and Canada, replace the fuse with: LittelFuse ® type 218001 or
equivalent 5 x 20 mm, 1A, 250V, time-delay fuse.
Owner's Manual
9