FUJITSU 461V FA - Manual (Page 21)

Color monitor 461V FA
A26361-K708-Z100-2-5E19 English - 13
Monitor settings with the buttons of the control panel
With the buttons of the control panel, you can make the following settings directly: auto-adjustment
of the monitor, adjusting the brightness and adjusting the contrast.
i
Other settings are carried out via an integrated OSD menu (On-Screen Display). For
additional information, refer to the section "
Monitor settings using the OSD menu ".
2 3 4
AUTO
1
OK
1 = AUTO button
2 = Arrow buttons and OK button 3 = Power indicator
4 = ON/OFF switch
Performing auto-adjustment of the monitor
Ê Press the AUTO button.
The picture quality ( PHASE , CLOCK ) and picture position will be optimally adjusted for your system.
Adjusting the brightness and contrast
Contrast and brightness are adjusted directly with the arrow buttons.
i
You will increase the life of your screen if you adjust the brightness to medium.
Ê Press the or button (brightness) or or (contrast).
A window is displayed with a setting range (in this case BRIGHTNESS ).
B R I G H T N E S S
50
Ê Press the or button to adjust the
brightness.
Ê Press the or button to adjust the
contrast.
The setting window disappears after
approximately 3 seconds if no further setting is
made. All changes are stored automatically.