Fisher AVL3211 - Manual (Page 14)

Connections
(continued)
Connect a DVD player or Set-Top Box
12
Connect the Video cable between the Y, Cb/Pb, Cr/Pr input jacks on the unit and Y, Pb, Pr output jacks on the DVD player.
Connect the Audio cable between the AUDIO input jack on the unit and AUDIO output jacks on the DVD player.
How to connect a DVD Player using Component Video Connections:
1.
Turn on your TV , press SOURCE button on the remote control.
2. Press 5 or6 repeatedly to select
YPBPR1 or YPBPR2,
and press or
to confirm.
3. Turn on your DVD player, insert a DVD disc and press the Play button.
3 4
To play DVD
Note:
The Y, Pb,Pr outputs on your DVD player are sometimes labeled Y, Cb, Cr or Y, B-Y, R-Y. If so, connect the cables to like colours.
Cables are often color-coded to
connectors. Connect red to red,
white to white, etc.
PC
H D M I
TV
AV1
AV2
SVIDEO
YPBPR1
YPBPR2
SOURCE
:ADJ
- S VIDEO
AV OUT
R L VIDEO AUDIO
Rear of the DVD, STB
DVI
AUDIO COMPONENT
Audio
cable
L R AUDIO P
b
P r Y
Video
cable
DVD player, STB, etc.