Fisher AVL3211 - Manual (Page 20)

Setting Picture
Customizing the Picture
Within the menu, use 5 , 6 ,3 or 4 to navigate or adjust.
Press
MENU button repeatedly to exit.
Press MENU to display the menu PICTURE , and press 6 to access.
1
3
2
Notes:
The PICTURE MENU is shown as an example.
The menu options may be different when the unit works in different mode.
18
Option Function Choice/remarks
Picture Mode
Brightness
Contrast
Selects a desired picture mode.
Standard/Movie/Vivid/User
Adjusts screen brightness for easier viewing of
dark picture such as night scenes and black hair.
Adjusts image contrast.
4 : stronger
3 : weaker
Saturation Adjusts color saturation.
4 : lighter
3 : darker
4 : stronger
3 : weaker
Reduces noise in the picture,
commonly called snow.
Low/Mid/High/Off
Sharpness
Adjusts tint for image.
Adjusts image sharpness and displays a sharp
image.
Tint
4 : greenish
3 : purplish
Color Tone Normal/Warm/Cool
Note: you may directly press PICTURE button on
the remote control to select.
Selects one of three automatic color adjustments.
Sets to warm to enhance hotter colors such as red, or
set to cool to see less intense colors with more blue.
4 : sharper
3 : softer
3D NR
Scale
Adjusts screen aspect ratio.
Normal/Panorama/Full/Zoom1/Zoom2
Note: you may directly press SCALE button on the
remote control to select.
Note: The Tint item is for NTSC system.
The scale item cannot be adjusted when there is no input signal or the picture is freezed.
Freezing picture
Press the
STILL button to hold on the image on the screen (the video sources still run).
Press it again to reactivate the image.
Note: For the sake of protecting the screen, please do not freeze a picture for a long time.
PICTURE
：SEL ：ADJ ：EXIT MENU
CONTRAST
TINT
SATURATION
SHARPNESS
BRIGHTNESS
COLOR TONE
53
SCALE
PICTURE MODE
STANDARD
FULL
NORMAL
50
50
50
50
3D NR LOW