Furuno Ls4100 - Manual (Page 20)

14
WAYPOINT LIST
01 01
02 03
03
------
------
------
------
------
------
------
------
------
[MENU]: Exit
Waypoint list
4. Press ▲ or ▼ to choose an empty
waypoint and press ►. Press ►
again.
NEW WAYPOINT
Name FREQ.
Lat : 34
°
22.796'N
Lon : 136
°
07.264'E
05
[MENU]: Exit
0 4------ ENT
Erase?
New waypoint window, name entry
5. Use ▲ or ▼ to set character; ◄ or
► to shift cursor.
6. Press ► to select ENT .
7. Enter latitude and longitude, similar
to how you entered waypoint name.
8. Press the [MENU/ESC] key to
register the waypoint.
Editing waypoints
1. Press the [MENU/ESC] key to open
the main menu.
2. Use ▲ or ▼ to choose WAYPOINT
LIST from page 2 of the menu.
3. Press ► to open the waypoints list.
4. Use ▲ or ▼ to choose a waypoint
and press ►.
5. Use ▲ or ▼ to choose the item to
edit. (name, latitude or longitude)
6. Press ► to open the data entry
window.
7. Use ▲ or ▼ to set character; ◄ or
► to choose location.
8. Press ► to choose ENT .
9. Press the [MENU/ESC] key.
Erasing waypoints
1. Press the [MENU/ESC] key.
2. Use ▲ or ▼ to choose WAYPOINT
LIST from page 2 of the menu.
3. Press ► to open the waypoints list.
4. Use ▲ or ▼ to choose the waypoint
to erase, and then press ►.
Note:
You cannot erase a waypoint
which is selected as “GOTO WPT.”
5. Press ▼ to choose “Erase.”
6. Press ► to open the options window.
7. Press ▲ to select YES to erase the
waypoint. The waypoint list appears,
with the erased waypoint blank.
8. Press the [MENU/ESC] key twice to
close the menu.
Setting destination waypoint
Set a destination waypoint to find range,
bearing and time-to-go to that point. You
can see range and bearing to a
waypoint. Time-to-go is shown on the
Time to Go digital display.
1. Press the [MENU/ESC] key to open
the main menu.
2. Use ▲ or ▼ to choose GOTO WPT
from page 2 of the menu.
3. Press ► to open the waypoints list.
Off
01
02
03
04
--------
--------
--------
--------
--------
--------
--------
--------
Waypoint list
4. Use ▲ or ▼ to choose a waypoint.
5. Press the [MENU/ESC] key to close
the menu.