Fender Deluxe 90 User Manual
Page 5
TREBLE
MID
BASS
REVERB
VE
PRE
OUT
PWR
IN
F E N D E R M U S I C A L I N S T R U M E N T S
FOOT
SWITCH
S
L
M
N
O
P
Q
R
K. MORE DRIVE - When this button is pressed in,
drive channel gain is increased.
L. TREBLE - Adjusts the amount of increase or
decrease in the high frequency range of the drive
(distortion) channel.
M. MID - Adjusts the amount of increase or decrease
in the middle frequency range of the normal drive
(distortion) channel.
N. BASS - Adjusts the amount of increase or
decrease in the low frequency range of the drive
(distortion) channel.
O. REVERB - Adjusts the amount of reverb present
in both the normal and drive channels.
P. FOOTSWITCH (INCLUDED) - Plug-in connection
for the remote footswitch to select between the
normal and drive channels and to select "More
Drive". Using the footswitch overrides the front panel
select buttons. NOTE: Any good quality patch cord
will work with the remote footswitch, however, a
speaker grade cord is preferable to a coax guitar
cord.
Q. PRE OUT - This unbalanced jack provides an
output signal from the preamp. It may be used to
drive effects units in an effects loop, to drive
additional amplifiers in a multi-amp set up, or as a
preamp send to a mixing console.
R. PWR IN - This unbalanced jack provides a return
from your effects units. This jack can also be used as
a power amp input.
S. POWER JEWEL - This red jewel illuminates when
your Deluxe 90 is receiving power.
5