Equipment checklist, Package contents, Optional rack-mounting equipment – Foundry Networks OSI User Manual
Page 32: Equipment checklist -2
I
NSTALLING
THE
S
WITCH
4-2
© 2003 Foundry Networks, Inc.
February 2003
Equipment Checklist
After unpacking the EdgeIron 4802CF, check the contents to be sure you
have received all the components. Then, before beginning the installation,
be sure you have all other necessary installation equipment.
Package Contents
◆ EdgeIron 4802CF unit
◆ Four adhesive foot pads
◆ Bracket Mounting Kit containing two brackets and eight screws for
attaching the brackets to the switch
◆ Power Cord
◆ RS-232 console cable
◆ CD-ROM containing software, Foundry EdgeIron 4802CF Installation
Guide, and Foundry EdgeIron
User Guide
◆ User Agreement Envelope
◆ Registration Card
Optional Rack-Mounting Equipment
If you plan to rack-mount the switch, be sure to have the following
equipment available:
◆ Four mounting screws for each device you plan to install in a
rack—these are not included
◆ A screwdriver (Phillips or flathead, depending on the type of screws
used)