Fluke 87 III - Manual (Page 39)

MIN MAX Recording Mode
31
Table 8. MIN MAX Functions
Button MIN MAX Function
M
Enter MIN MAX recording mode. The meter is locked in the range displayed before you
entered MIN MAX mode. (Select the desired measurement function and range before
entering MIN MAX.) The meter beeps each time a new minimum or maximum value is
recorded.
M
(While in MIN MAX mode)
Scroll through minimum (MIN), maximum (MAX), and average (AVG) values.
T
PEAK MIN MAX
Model 87 only: Select 100 ms or 250
µ
s response time. (The 250 µs response time is
indicated by "1 ms" on the display.) Stored values are erased. The present and AVG
(average) values are not available when 250
µ
s is selected.
I
Stop recording without erasing stored values. Press again to resume recording.
M
(hold for 1 second)
Exit MIN MAX mode. Stored values are erased. The meter stays in the selected range.
Hold down
M
while turning the meter on
Select 1 s high-accuracy response time. See text under "MIN MAX Recording Mode" for
more explanation. MIN MAX readings for the frequency counter are recorded only in the
high-accuracy mode.