FEIN Power Tools FMM 250 - Manual (Page 9)

M ULTI M ASTER FMM 250 / M ULTI M ASTER FMM 250 Q
9
EN
Technical description and specifications.
Before mounting or replacing application tools or accessories, pull the power
plug. This preventive safety measure rules out the danger of injuries
through accidental starting of the power tool.
DANGER This sign warns of a directly imminent, dan-
gerous situation. A false reaction can cause
a severe or fatal injury.
WARNING This sign indicates a possible dangerous
situation that could cause severe or fatal
injury.
CAUTION This sign warns of a possible dangerous
situation that could cause injury.
Protective class II Product with double or reinforced insula-
tion
mm Millimeter Unit of measure for length, width, height or
depth
kg Kilogram Unit of measure for the mass
V Volt Unit of measure for the electric voltage
A Ampere Unit of measure for the electric current
intensity
W Watt Unit of measure for the output
min per minute Unit of measure for number of revolutions,
strokes, impacts or oscillations per minute
° Degree Unit of measure for the angle width
~ or a. c. Current type Alternating current
1 ~ Power supply type Alternating current single-phase
n
o
No-load speed Revolution speed at no-load
1/min per minute Unit of measure for number of revolutions,
strokes, impacts or oscillations per minute
Ø Diameter Diameter of a round part
Symbol Term, meaning Explanation
DANGER
WARNING
CAUTION
WARNING
3 41 01 091 21 0.book Seite 9 Dienstag, 24. Juli 2007 3:32 15