FARGO electronic TM-U590 - Manual (Page 2)

Printer Parts
DIP Switch Tables
POW ER ERRO R RELEASE SLIP
FORWARD FORWARD
REVERSE REVERSE
RELE ASE RELEASE
EPSON
4
table
5
front cover
3
on/off switch
2
paper guide
1
document table
6
control pane
l
Serial
SW Function ON OFF
1-1 Data receive error Ignored Prints “?”
1-2 Receive buffer 69 bytes 4 KB
1-3 Handshaking XON/XOFF DTR/DSR
1-4 Data word length 7 bits 8 bits
1-5 Parity check Enabled Disabled
1-6 Parity selection Even Odd
1-7 See “Transmission speed” table.
1-8
SW Function ON OFF
2-1 Handshaking
(BUSY
condition) Buffer full Offline or buffer full
2-2 Customer
display Connected Not connected
2-3, 2-4 Undefined — —
2-5, 2-6 Internal use. Do not change. Fixed to OFF.
2-7 I/F Pin 6 reset Enabled Disabled
2-8 I/F Pin 25
reset Enabled Disabled
Transmission speed
[bps: bits per second]
1-7 1-8 Speed
ON ON 2400 bps
OFF ON 4800 bps
ON OFF 9600 bps
OFF OFF 19200 bps
Parallel
SW Function ON OFF
1-1 Auto line feed Enabled Disabled
1-2 Receive buffer 69 bytes 4 KB
1-3 ~ 1-8 Undefined — —
SW Function ON OFF
2-1 Handshaking
(BUSY
condition) ❑ Buffer full
❑ Reading
data
❑ Offline
❑ Buffer full
❑ Reading
data
2-2 Reserved. Fixed to OFF. Do not change.
2-3, 2-4 Undefined — —
2-5 ~ 2-7 Reserved. Fixed to OFF. Do not change.
2-8 I/F Pin 31
reset Fixed to ON. Do not change.