FARGO electronic HDP5000 User Manual
FARGO electronic Printers
Advertising
HDP5000 High Definition Card
Printer/Encoder User Guide (Rev. 1.4)
• HDP5000 single-side
• HDP5000 dual-side
• HDP5000 single-side (with single-side lamination)
• HDP5000 dual-side (with single-side lamination)
• HDP5000 single-side (with dual-side lamination)
• HDP5000 dual-side (with dual-side lamination)
Part Number: L000950
Advertising
Table of contents
Document Outline
- Section 1: Printer Overview
- Section 2: Specifications
- Safety Messages (review carefully)
- Introduction
- Reviewing the HDP5000 Printer Overview table
- Reviewing the HDP5000 Package
- Reviewing the HDP5000 (front)
- Reviewing the HDP5000 Card Printer
- Regulatory Compliances
- Agency Listings
- Technical Specifications
- Functional Specifications
- Printer Components: Resin Thermal Transfer to USB Interface Port
- Printer Components: LCD and Softkey Control Pad
- Printer Components: Print Ribbons
- Printer Components: Blank Cards
- Printer Components: Card Input and Output Hoppers
- Printer Components: Card Output Hopper and Reject Hopper
- Printer Unit: Reviewing the Card Lamination Module
- Printer Components: Transfer Roller
- Reviewing the Overlaminates
- Section 3: Installation Procedures
- Safety Messages (review carefully)
- Introduction
- Time Requirement
- System Requirements
- Inspection – HDP5000
- Unpacking the Printer
- Printer Loading Procedures
- Printer Driver Installation Procedures
- Installation Procedures
- Installing the HDP5000 Printer Driver
- Installing the HDP5000 Printer Driver (continued)
- Installing the HDP5000 Printer Driver (continued)
- Installing the HDP5000 Printer Driver (continued)
- Installing the HDP5000 Printer Driver (continued)
- Installing the HDP5000 Printer Driver (continued)
- Installing the HDP5000 Printer Driver (continued)
- Installing the HDP5000 Printer Driver (continued)
- Installing the HDP5000 Printer Driver (continued)
- Installing the HDP5000 Printer Driver
- Printing a Test Print Image
- Section 4: Accessory Procedures
- Section 5: General Troubleshooting
- LCD Messages
- Safety Messages (review carefully)
- Troubleshooting - LCD and Printer Error Message Tables.
- How to use the LCD Error Message Table (example provided)
- Troubleshooting with the LCD Error Message Table
- Troubleshooting with the LCD Error Message Table (continued)
- Troubleshooting with the LCD Error Message Table (continued)
- Troubleshooting with the LCD Error Message Table (continued)
- Troubleshooting with the LCD Error Message Table (continued)
- Troubleshooting with the LCD Error Message Table (continued)
- Troubleshooting with the LCD Error Message Table (continued)
- Troubleshooting with the LCD Error Message Table (continued)
- Troubleshooting with the LCD Error Message Table (continued)
- Troubleshooting with the LCD Error Message Table (continued)
- Troubleshooting with the LCD Error Message Table (continued)
- Troubleshooting with the LCD Error Message Table (continued)
- Troubleshooting with the LCD Error Message Table (continued)
- Troubleshooting with the LCD Error Message Table (continued)
- Troubleshooting with the LCD Error Message Table (continued)
- Troubleshooting with the LCD Error Message Table (continued)
- Troubleshooting with the LCD Error Message Table (continued)
- Troubleshooting with the Printer Error Message Table
- Troubleshooting with the Printer Error Message Table (continued)
- Troubleshooting with the Printer Error Message Table (continued)
- Troubleshooting with the Printer Error Message Table (continued)
- Troubleshooting with the Printer Error Message Table (continued)
- Troubleshooting with the Printer Error Message Table (continued)
- Troubleshooting with the Printer Error Message Table (continued)
- Troubleshooting with the Printer Error Message Table (continued)
- Troubleshooting with the Printer Error Message Table (continued)
- Troubleshooting with the Printer Error Message Table (continued)
- Troubleshooting with the Printer Error Message Table (continued)
- Troubleshooting with the Printer Error Message Table (continued)
- Troubleshooting with the Printer Error Message Table (continued)
- Troubleshooting with the Printer Error Message Table (continued)
- Troubleshooting with the Printer Error Message Table
- Communications Errors
- Printing a Test Image
- Section 6: Ethernet Option Section
- Introduction
- Technical Specification - Ethernet Option
- Functional Specification - Ethernet Option
- Network Services - Overview
- Network Management Interface
- Telnet Command Line Interface
- Ethernet Web Pages – Standard Procedures
- Reviewing Web page security
- Logging In
- Accessing the Home page
- Reviewing the Home Page
- Configuring the Network Settings
- Using the Media Information page
- Using the TCP/IP page
- Using the Printer page
- Using the System Log page
- Using the Administration pages
- Using the Reboot pages
- Using the Print Path page
- Additional Procedures
- Ethernet Printer Troubleshooting Procedures
- Reviewing Frequently-asked Questions
- Glossary of Terms
- Section 7: Card Lamination Module
- Safety Messages (review carefully)
- Reviewing the Card Lamination Module
- Installing the Card Lamination Module
- Section 8: Printer Adjustments
- Safety Messages (review carefully)
- Printing on Alternate Card Stocks
- Using the Card tab
- Using the Device Options tab
- Using the Image Color tab
- Using the Image Transfer tab
- Using the Magnetic Encoding tab
- Using the Encoding Mode dropdown list
- Using the Encoding Mode dropdown list (continued)
- Using the Encoding Mode dropdown list (continued)
- Using the Encoding Mode dropdown list (continued)
- Using the Encoding Mode dropdown list
- Reviewing the Shift Data Left Function
- Reviewing the Magnetic Track Options
- Using the Magnetic Track Options
- Using the Character Size buttons
- Using the ASCII Offset dropdown list
- Using the Bit Density dropdown list
- Using the LRC Generation dropdown list
- Using the Encoding Mode dropdown list
- Reviewing the ISO Track Locations
- Sending the Track Information
- Reviewing the Sample String
- Reviewing the ASCII Code and Character Table
- Using the Default button (Image Transfer tab)
- Using the Encoding Mode dropdown list
- Using the Lamination tab (HDP5000-LC)
- Using the K Panel Resin tab
- Using the Scroll controls
- Using the Click and Drag capability
- Selecting “inches or mm” radio button
- Using the Add and Delete buttons
- Selecting the Full Card
- Selecting the Defined Area(s)
- Selecting the Undefined Area(s)
- Defining the Area to activate the Card Grid
- Measuring the Total Card area
- Measuring the Area to be positioned on the Card
- Selecting the Print YMC under the K and Print K Only options
- Using the Printer Supplies tab
- Section 9: Toolbox
- Accessing the Toolbox
- Selecting the Configuration tab
- Using the Configuration Tab
- Using the Optional Printer Features Group Box
- Using the Event Monitoring Group Box
- Selecting the Calibrate Laminator tab
- Selecting the Calibrate Film tab
- Selecting the Calibrate Ribbon tab
- Selecting the Clean Printer tab
- Selecting the Clean Printer tab (continued)
- Using the Clean Printer Group Box
- Clean Now radio button: This is the default every time this message box launches.
- Clean Now radio button: When this is chosen (and click OK), the Toolbox is launched open to Clean Printer tab.
- Remind Me radio dial: This activates a drop down for the User to choose a number of cards to print until the next reminder. If the User chooses Never, then the Clean Printer notification is cleared from Configuration tab. (Note: This is because IF the Clean Printer notification is checked, the User might believe that the reminder is working while Never means the reminder will never be displayed.)
- OK button: Use this button to close the dialog box and execute the User choice.
- Cancel button: Use this button to close the dialog box with no changes to the state of Printer setting. If the User exits the Toolbox without clicking Clean, then the Printer Cleaning Reminder dialog box will reappear on the next print.
- Selecting the Advanced Settings tab
- Selecting the Advanced Settings tab
- Using the Image Darkness Option
- Using the Print Top of Form Option
- Using the Print Left of Form Option
- Using the Mag Top of Form Option
- Using the Print Flip Angle Option
- Using the Print Flip Level Option
- Using the Encoder Flip Angle Option
- Setting the Printhead Resistance
- Using the Transfer TOF Adjustment Option
- Using the Transfer Temp Offset Option
- Print Tension Settings
- Transfer Tension Settings
- Using the Film Supply Transfer Tension Option
- Using the Film Takeup Transfer Tension Option
- Using the Resin Heat Adjust Option
- Using the Sleep Time Option
- Using the Standby Time Option
- Using the Blush Point Option
- Using the LCD Contrast Option
- Using the Cleaning rate Option
- Using the EAT Disable Option
- Using the Film Print Cooling Level Option
- Using the Film Transfer Cooling Level Option
- Using the Enable Ribbon Wrinkle Compensation Option
- Using the Lamination Top of Form Option
- Using the Lamination End of Form Option
- Using the Lamination Bottom Takeup Option
- Using the Lamination Top Takeup Option
- Using the Lamination Card Backup Option
- Using the lamination Card Length Option
- Reviewing the No Printer Connected error message
- Reviewing the Value outside the Range error message
- Section 10: Cleaning
- Section 11: Fargo Workbench Printer Utility
- Section 12: Fluorescent Panel Usage
- Configuring Fluorescent Data (F-Panel for YMCFK Ribbon) using the Workbench
- Configuring Fluorescent Data (F-Panel for YMCFK Ribbon) using the Workbench (continued)
- Configuring Fluorescent Data (F-Panel for YMCFK Ribbon) using the Workbench (continued)
- Configuring Fluorescent Data (F-Panel for YMCFK Ribbon) using the Workbench (continued)
- Configuring Fluorescent Data (F-Panel for YMCFK Ribbon) using the Workbench (continued)
- Configuring Fluorescent Data (F-Panel for YMCFK Ribbon) using the Workbench (continued)
- Configuring Fluorescent Data (F-Panel for YMCFK Ribbon) using the Workbench (continued)
- Configuring Fluorescent Data (F-Panel for YMCFK Ribbon) using the Workbench (continued)
- Configuring Fluorescent Data (F-Panel for YMCFK Ribbon) using the Workbench (continued)
- Configuring Fluorescent Data (F-Panel for YMCFK Ribbon) using the Workbench (continued)
- Configuring Fluorescent Data (F-Panel for YMCFK Ribbon) using the Workbench
- Section 13: Packing the Card Printer
- Section 14: Firmware Updates
- Section 15: Fargo Technical Support
- Section 16: Reviewing Spare Parts Lists
- Section 17: Glossary of Terms
- Glossary of Terms (continued)
- Glossary of Terms (continued)
- Glossary of Terms (continued)
- Glossary of Terms (continued)
- Glossary of Terms (continued)
- Glossary of Terms (continued)
- Glossary of Terms (continued)
- Glossary of Terms (continued)
- Glossary of Terms (continued)
- Glossary of Terms (continued)
- Glossary of Terms (continued)
- Glossary of Terms (continued)
- Glossary of Terms (continued)
- Glossary of Terms (continued)
- Glossary of Terms (continued)
- Glossary of Terms (continued)
- Glossary of Terms (continued)
- Glossary of Terms (continued)
- Glossary of Terms (continued)
- Glossary of Terms (continued)
- Section 18: Index