Reviewing the interface, Reviewing the current settings, Reviewing the interface -18 – FARGO electronic HDP5000 User Manual
Page 147: Reviewing the current settings -18, Switching to the, Automatic ip address mode
Advertising
RESTRICTED USE ONLY
Fargo Electronics, Inc.
HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.4)
6-18
Reviewing the Interface
The Interface display indicates the network speed supported by the Printer.
Reviewing the Current Settings
The Current Settings page section displays the current active network settings for the Printer.
• These are also labeled as “Dynamic” if they were provided by DHCP or “Static” if they
came from the Stored Settings.
• The current settings will be “Dynamic” only if Obtain an IP address automatically was
selected when the Printer was restarted last.
Advertising