FARGO electronic HDP5000 - Manual (Page 359)

RESTRICTED USE ONLY Fargo Electronics, Inc.
HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.4) 12-9
Configuring Fluorescent Data (F-Panel for YMCFK Ribbon) using the
Workbench
(continued)
Step Procedure
10 Follow the same instruction as above for the back side of the card.
11 a. Save this template using File-Save.
b. Close the Workbench. (Note: Any Software program file printed with the
YMCFK ribbon installed into the printer will print this design with the F panel
of the ribbon. It will print the same file each time unless you recreate a new
template.)