Selecting the log type, Selecting the log type -30 – FARGO electronic HDP5000 User Manual
Page 159
Advertising
RESTRICTED USE ONLY
Fargo Electronics, Inc.
HDP5000 High Definition Card Printer/Encoder User Guide (Rev. 1.4)
6-30
Selecting the Log Type
Step Procedure
1 Select
the
System Log link. See the next page.
2
Select the link for the log name you want to view or configure (the default
choices are log1 or log2).
3 Select
the
Print Job Started checkbox to generate the log entries for each
Print Job Started.
4 Select
the
Printer Error checkbox to generate the log entries for each Printer
Error.
5 Select
the
Submit button.
6
Login as a root User if you are so prompted. (Note: Any change of setting
will only be accepted after you have successfully logged in.)
Advertising