Document Outline

• Section 1: Printer Overview
  • How to use the guide
  • Safety Messages (review carefully)
  • HDP5000 Process Flow (in table format)
    • Reviewing the HDP5000 Boot-up Sequence
    • Reviewing the HDP5000 Sequence of Operations
      • Reviewing HDP5000 Card Printer Sequence of Operations (continued)
      • Reviewing the Lamination Module Boot-up Sequence
      • Reviewing the Lamination Module Sequence of Operations
• Section 2: Specifications
  • Safety Messages (review carefully)
  • Introduction
  • Reviewing the HDP5000 Printer Overview table
    • Reviewing the HDP5000 Package
    • Reviewing the HDP5000 (front)
    • Reviewing the HDP5000 Card Printer
    • Regulatory Compliances
    • Agency Listings
      • FCC Rules
      • Environmental Protection (China-RoHS)
    • Technical Specifications
      • Technical Specifications (continued)
      • Technical Specifications (continued)
      • Technical Specifications (continued)
      • Technical Specifications (continued)
      • Technical Specifications (continued)
      • Technical Specifications (continued)
      • Technical Specifications (continued)
      • Technical Specifications
    • Functional Specifications
      • Printer Components: Resin Thermal Transfer to USB Interface Port
      • Printer Components: LCD and Softkey Control Pad
        • Printer Components: LCD and Softkey Control Pad (continued)
      • Printer Components: Print Ribbons
      • Printer Components: Blank Cards
        • Printer Components: Blank Cards (continued)
      • Printer Components: Card Input and Output Hoppers
      • Printer Components: Card Output Hopper and Reject Hopper
      • Printer Unit: Reviewing the Card Lamination Module
      • Printer Components: Transfer Roller
    • Reviewing the Overlaminates
      • Reviewing the Thermal Transfer Film and PolyGuard Overlaminates
      • Reviewing the CR-80 Patch Size
      • Reviewing the Overlaminate Design
• Section 3: Installation Procedures
  • Safety Messages (review carefully)
  • Introduction
    • Time Requirement
    • System Requirements
    • Inspection – HDP5000
    • Unpacking the Printer
      • Unpacking the Printer (continued)
      • Unpacking the Printer
      • Choosing a Good Location
      • About Moisture Condensation
    • Printer Loading Procedures
      • Loading the Print Ribbon
      • Loading the Clear HDP Transfer Film
        • Loading the Clear HDP Transfer Film (continued)
        • Loading the Clear HDP Transfer Film (continued)
      • Inserting the Card Cleaning Roller
        • Inserting the Card Cleaning Roller (continued)
        • Inserting the Card Cleaning Roller (continued)
      • Loading the Overlaminate
        • Loading the Overlaminate (continued)
        • Loading the Overlaminate (continued)
      • Loading the Blank Cards
        • Loading the Blank Cards (continued)
      • Connecting Power to HDP5000 Printer and Lamination Module
        • Connecting Power to HDP5000 Printer and Lamination Module (continued)
        • Connecting Power to HDP5000 Printer and Lamination Module (continued)
    • Printer Driver Installation Procedures
    • Installation Procedures
      • Installing the HDP5000 Printer Driver
        • Installing the HDP5000 Printer Driver (continued)
        • Installing the HDP5000 Printer Driver (continued)
        • Installing the HDP5000 Printer Driver (continued)
        • Installing the HDP5000 Printer Driver (continued)
        • Installing the HDP5000 Printer Driver (continued)
        • Installing the HDP5000 Printer Driver (continued)
        • Installing the HDP5000 Printer Driver (continued)
        • Installing the HDP5000 Printer Driver (continued)
    • Printing a Test Print Image
      • Printing a Test Print Image (continued)
• Section 4: Accessory Procedures
  • Safety Messages (review carefully)
  • Using the Security Lock Slot on the HDP5000
    • Using the Security Lock Slot on the HDP5000 (continued)
    • Installation and Removal Procedures Flipper and Lamination Modules
      • Removing the Output Side Upgrade Cover
    • Installing the Flipper Module Accessory
      • Flipper Module Accessory (continued)
      • Installing the Lamination Module Accessory
        • Installing the Lamination Module Accessory (continued)
• Section 5: General Troubleshooting
  • LCD Messages
  • Safety Messages (review carefully)
  • Troubleshooting - LCD and Printer Error Message Tables.
    • How to use the LCD Error Message Table (example provided)
    • Troubleshooting with the LCD Error Message Table
      • Troubleshooting with the LCD Error Message Table (continued)
      • Troubleshooting with the LCD Error Message Table (continued)
      • Troubleshooting with the LCD Error Message Table (continued)
      • Troubleshooting with the LCD Error Message Table (continued)
      • Troubleshooting with the LCD Error Message Table (continued)
      • Troubleshooting with the LCD Error Message Table (continued)
      • Troubleshooting with the LCD Error Message Table (continued)
      • Troubleshooting with the LCD Error Message Table (continued)
      • Troubleshooting with the LCD Error Message Table (continued)
      • Troubleshooting with the LCD Error Message Table (continued)
      • Troubleshooting with the LCD Error Message Table (continued)
      • Troubleshooting with the LCD Error Message Table (continued)
      • Troubleshooting with the LCD Error Message Table (continued)
      • Troubleshooting with the LCD Error Message Table (continued)
      • Troubleshooting with the LCD Error Message Table (continued)
      • Troubleshooting with the LCD Error Message Table (continued)
      • Troubleshooting with the Printer Error Message Table   
        • Troubleshooting with the Printer Error Message Table (continued) 
        • Troubleshooting with the Printer Error Message Table (continued) 
        • Troubleshooting with the Printer Error Message Table (continued) 
        • Troubleshooting with the Printer Error Message Table (continued) 
        • Troubleshooting with the Printer Error Message Table (continued) 
        • Troubleshooting with the Printer Error Message Table (continued) 
        • Troubleshooting with the Printer Error Message Table (continued) 
        • Troubleshooting with the Printer Error Message Table (continued) 
        • Troubleshooting with the Printer Error Message Table (continued) 
        • Troubleshooting with the Printer Error Message Table (continued) 
        • Troubleshooting with the Printer Error Message Table (continued) 
        • Troubleshooting with the Printer Error Message Table (continued) 
        • Troubleshooting with the Printer Error Message Table (continued) 
        • Troubleshooting with the Printer Error Message Table
    • Communications Errors
      • Resolving the Communication Errors
        • Resolving the Communication Errors (continued)
    • Printing a Test Image
      • Reviewing the Alignment Self Test Card
      • Reviewing the Color Bars Self Test
      • Reviewing the Device Settings Self Test
      • Reviewing the Magnetic Self Test
      • Reviewing the Resin Self Test
• Section 6: Ethernet Option Section
  • Introduction
  • Technical Specification - Ethernet Option
  • Functional Specification - Ethernet Option
  • Network Services - Overview
    • Reviewing the Print Server
    • Reviewing the Web Page Server
    • Reviewing the Network Management Interface
    • Reviewing the Telnet Server
  • Network Management Interface
  • Telnet Command Line Interface
    • Initiating a Telnet Session
    • Reviewing the Telnet Command Table
      • Reviewing the Telnet Command Table (continued)
      • Reviewing the Telnet Command Table (continued)
      • Reviewing the Telnet Command Table (continued)
      • Reviewing the Telnet Command Table (continued)
      • Reviewing the Telnet Command Table (continued)
      • Reviewing the Telnet Command Table (continued)
  • Ethernet Web Pages – Standard Procedures
    • Reviewing Web page security
    • Logging In
    • Accessing the Home page
    • Reviewing the Home Page
      • Reviewing the Home Page Categories and Fields (table)
    • Configuring the Network Settings
      • Accessing the Network Settings page
      • Reviewing the Interface
      • Reviewing the Current Settings
      • Switching to the Automatic IP Address Mode
      • Changing to the Static IP Address Mode
        • Changing to the static IP address mode (continued)
      • Using the Clear Changes button
    • Using the Media Information page
    • Using the TCP/IP page
      • Using the TCP/IP page
    • Using the Printer page
      • Reviewing the Printer page (continued)
    • Using the System Log page
      • Changing the Log Name
      • Selecting the Log Type
      • Selecting the Log Destination
      • Setting up Email Event logging
      • Specifying UDP Event logging
        • Specifying UDP Event logging
      • Specifying TCP Event logging
        • Specifying TCP Event logging (continued)
    • Using the Administration pages
      • Using the System Information page
        • Using the System Information page (continued)
      • Changing the Root Password
    • Using the Reboot pages
      • Rebooting the Printer
      • Upgrading the Main Firmware
        • Upgrading the Main Firmware (HDP5000 only) (continued)
        • Upgrading the Main Firmware (HDP5000 only) (continued)
        • Upgrading the Main Firmware (HDP5000 only) (continued)
    • Using the Print Path page
      • Using the Print Path page (continued)
      • Using the Help page
  • Additional Procedures
    • Accessing the Ethernet Status LEDs
      • Reviewing the HDP5000 LED Table
    • Upgrading the Main Firmware with the Fargo Workbench Printer Utility
      • Upgrading the Main Firmware with the Fargo Workbench Printer Utility (continued)
    • Restoring the Factory Settings for Ethernet
      • Resetting the HDP5000 settings
      • Changing the HDP5000 LCD Network Settings
      • Accessing the Network Setup Menu
      • Changing the DHCP Setting
      • Changing the ANEG setting
      • Saving addresses
      • Resetting Passwords
      • Accessing the HDP5000 IP Address
  • Ethernet Printer Troubleshooting Procedures
    • Troubleshooting procedures
    • Verifying the Printer Connection
    • Verifying the Printer IP address
    • Verifying that your PC can access the Printer using the ping command
      • Verifying that your PC can access the Printer using the ping command (continued)
      • Printing a test page
  • Reviewing Frequently-asked Questions
    • Reviewing Frequently-asked Questions (continued)
    • Reviewing Frequently-asked Questions (continued)
    • Reviewing Frequently-asked Questions (continued)
    • Reviewing Frequently-asked Questions (continued)
    • Reviewing Frequently-asked Questions (continued)
    • Reviewing Frequently-asked Questions
  • Glossary of Terms
    • Glossary of Terms (continued)
• Section 7: Card Lamination Module
  • Safety Messages (review carefully)
  • Reviewing the Card Lamination Module
  • Installing the Card Lamination Module
    • Introduction
    • Inspecting the Card Lamination Module
    • Unpacking the Card Lamination Module
    • Preventing Moisture Condensation
    • Installing the Lamination Module Accessory
      • Installing the Lamination Module Accessory (continued)
    • Adjusting the Lamination Placement on the Card
      • Adjusting the Lamination Placement on the Card
    • Adjusting the Card Flattener
• Section 8: Printer Adjustments
  • Safety Messages (review carefully)
  • Printing on Alternate Card Stocks
    • Selecting the Right Cards and optimizing the HDP Print Process
    • Selecting the Appropriate HDP Printer Driver settings
      • Selecting the Appropriate HDP Printer Driver settings
      • Conducting the Tape Adhesion Test
        • Conducting the Tape adhesion Test (continued)
        • Conducting the Tape adhesion Test (continued)
    • Printer Driver Options
      • Installing Printer Driver Updates
        • Installing Printer Driver Updates
    • Setting Up the Printer Driver
      • Setting up Windows 2000/XP/2003
      • Using the OK, Cancel and Help buttons
  • Using the Card tab
    • Selecting the Card Size
    • Selecting the Card Type
      • Selecting the Card Type
      • Selecting the Card Type (continued)
      • Selecting the Card Type (continued)
      • Setting the Orientation
      • Specifying the number of Copies
      • Selecting the Diagnostics button
      • Selecting the Test Print button
      • Selecting the About button
      • Selecting the Toolbox button
  • Using the Device Options tab
    • Detecting Supplies at Print Time Function
      • Detecting Supplies at Print Time Function (continued)
      • Detecting Supplies at Print Time Function (continued)
      • Adjusting the Ribbon Type
      • Adjusting the Film Type
    • Using the Dual Sided Group Functions
      • Using the Dual Sided - Print Both Sides option
      • Using the Print Both Sides - Split 1 Set of Ribbon Panels option
      • Using the Print Both Sides - Print Back Image on Front of Card option
      • Using the Dual Sided - Print Back Side Only option
    • Using the Options Group
      • Using the Rotate Front 180 Degrees or Rotate Back 180 Degrees options
  • Using the Image Color tab
    • Using the Image Color tab (HDP5000)
      • Using the Quality – Color Matching dropdown
        • Using the Quality – Color Matching dropdown (continued)
        • Using the Quality – Color Matching dropdown (continued)
        • Using the Quality – Color Matching dropdown (continued)
      • Adjusting for the Resin Dither
      • Using the Advanced Image Color window
        • Using the Advanced Image Color window (continued)
        • Using the Advanced Image Color window (continued)
        • Using the Advanced Image Color window (continued)
        • Using the Advanced Image Color window (continued)
        • Using the Advanced Image Color window
      • Using the Default button on the Image Color tab
  • Using the Image Transfer tab
    • Adjusting the Image Position controls
      • Adjusting the Image Position controls (continued)
      • Adjusting the Transfer Dwell Time and Temperature
        • Adjusting the Transfer Dwell Time and Temperature (continued)
        • Adjusting the Transfer Dwell Time and Temperature (continued)
        • Adjusting the Transfer Dwell Time and Temperature
      • Using the Default button
  • Using the Magnetic Encoding tab
    • Using the Encoding Mode dropdown list
      • Using the Encoding Mode dropdown list (continued)
      • Using the Encoding Mode dropdown list (continued)
      • Using the Encoding Mode dropdown list (continued)
      • Using the Encoding Mode dropdown list
      • Reviewing the Shift Data Left Function
      • Reviewing the Magnetic Track Options
        • Reviewing the Magnetic Track Options
      • Using the Magnetic Track Options
        • Using the Magnetic Track Options
      • Using the Character Size buttons
      • Using the ASCII Offset dropdown list
      • Using the Bit Density dropdown list
      • Using the LRC Generation dropdown list
      • Using the Encoding Mode dropdown list
      • Reviewing the ISO Track Locations
      • Sending the Track Information
      • Reviewing the Sample String
      • Reviewing the ASCII Code and Character Table
      • Using the Default button (Image Transfer tab)
  • Using the Lamination tab (HDP5000-LC)
    • Selecting the Lamination Position
    • Adjusting the Lamination Speed - Transfer Dwell Time
    • Selecting the Lamination Side dropdown menu
    • Reviewing the Card Lamination Module Unit table (No Flipper versus Flipper)
    • Selecting the Lamination Type
      • Selecting the Lamination Type (continued)
      • Adjusting the Lamination Temperature
      • Selecting the Defaults button
  • Using the K Panel Resin tab
    • Using the Scroll controls
    • Using the Click and Drag capability
    • Selecting “inches or mm” radio button
    • Using the Add and Delete buttons
    • Selecting the Full Card
    • Selecting the Defined Area(s)
    • Selecting the Undefined Area(s)
    • Defining the Area to activate the Card Grid
    • Measuring the Total Card area
    • Measuring the Area to be positioned on the Card
    • Selecting the Print YMC under the K and Print K Only options
      • Selecting the Print YMC under the K and Print K Only options
  • Using the Printer Supplies tab
    • Reviewing Information on the Supplies tab
      • Reviewing Information on the Supplies tab
• Section 9: Toolbox
  • Accessing the Toolbox
  • Selecting the Configuration tab
  • Using the Configuration Tab
    • Using the Optional Printer Features Group Box
    • Using the Event Monitoring Group Box
      •  Do not show this message again: The check box allows the User to suppress message per Driver instance. Default = unchecked.
      • Reviewing the Ribbon Low message
      • Reviewing the Laminate Low Message
      • Using the Film Low message
      • Selecting the Set Language for Printer LCD Display Group Box
    • Selecting the Calibrate Laminator tab
    • Selecting the Calibrate Film tab
    • Selecting the Calibrate Ribbon tab
    • Selecting the Clean Printer tab
      • Selecting the Clean Printer tab (continued)
      • Using the Clean Printer Group Box
        •  Clean Now radio button: This is the default every time this message box launches.
        •  Clean Now radio button: When this is chosen (and click OK), the Toolbox is launched open to Clean Printer tab.
        •  Remind Me radio dial: This activates a drop down for the User to choose a number of cards to print until the next reminder. If the User chooses Never, then the Clean Printer notification is cleared from Configuration tab. (Note: This is because IF the Clean Printer notification is checked, the User might believe that the reminder is working while Never means the reminder will never be displayed.)
          •  OK button: Use this button to close the dialog box and execute the User choice.
          •  Cancel button: Use this button to close the dialog box with no changes to the state of Printer setting. If the User exits the Toolbox without clicking Clean, then the Printer Cleaning Reminder dialog box will reappear on the next print.
    • Selecting the Advanced Settings tab
      • Selecting the Advanced Settings tab
      • Using the Image Darkness Option
      • Using the Print Top of Form Option
        • Using the Print Top of Form Option
      • Using the Print Left of Form Option
      • Using the Mag Top of Form Option
        • Using the Mag Top of Form Option
      • Using the Print Flip Angle Option
      • Using the Print Flip Level Option
      • Using the Encoder Flip Angle Option
      • Setting the Printhead Resistance
      • Using the Transfer TOF Adjustment Option
        • Using the Transfer TOF Adjustment Option (continued)
        • Using the Transfer TOF Adjustment Option (continued)
      • Using the Transfer Temp Offset Option
    • Print Tension Settings
      • Using the Ribbon Print Takeup Tension Option
      • Using the Film Print Takeup Tension Option
      • Using the Ribbon Print Supply Tension Option
    • Transfer Tension Settings
      • Using the Film Supply Transfer Tension Option
      • Using the Film Takeup Transfer Tension Option
      • Using the Resin Heat Adjust Option
      • Using the Sleep Time Option
      • Using the Standby Time Option
      • Using the Blush Point Option
      • Using the LCD Contrast Option
      • Using the Cleaning rate Option
      • Using the EAT Disable Option
      • Using the Film Print Cooling Level Option
      • Using the Film Transfer Cooling Level Option
      • Using the Enable Ribbon Wrinkle Compensation Option
      • Using the Lamination Top of Form Option
      • Using the Lamination End of Form Option
      • Using the Lamination Bottom Takeup Option
      • Using the Lamination Top Takeup Option
      • Using the Lamination Card Backup Option
      • Using the lamination Card Length Option
      • Reviewing the No Printer Connected error message
      • Reviewing the Value outside the Range error message
        • If typing a value outside the range, an error message will display specific to the setting when leaving the spin control to click any other spin control, button or tab.
• Section 10: Cleaning
  • Using the Required Supplies
  • Safety Messages (review carefully)
    • Cleaning the Printer Platen Roller and Card Feed Rollers
      • Cleaning the Printer Platen Roller and Card Feed Rollers (cont)
    • Cleaning Procedures
      • Cleaning inside the Printer
      • Cleaning outside the Printer
      • Cleaning the Printhead
      • Replacing the Card Cleaning Roller
      • Cleaning the Magnetic Encoder
• Section 11: Fargo Workbench Printer Utility
  • Reviewing the Card tab and Diagnostic button
    • Reviewing the Card tab and Diagnostic button (continued)
• Section 12: Fluorescent Panel Usage
  • Configuring Fluorescent Data (F-Panel for YMCFK Ribbon) using the Workbench
    • Configuring Fluorescent Data (F-Panel for YMCFK Ribbon) using the Workbench (continued)
    • Configuring Fluorescent Data (F-Panel for YMCFK Ribbon) using the Workbench (continued)
    • Configuring Fluorescent Data (F-Panel for YMCFK Ribbon) using the Workbench (continued)
    • Configuring Fluorescent Data (F-Panel for YMCFK Ribbon) using the Workbench (continued)
    • Configuring Fluorescent Data (F-Panel for YMCFK Ribbon) using the Workbench (continued)
    • Configuring Fluorescent Data (F-Panel for YMCFK Ribbon) using the Workbench (continued)
    • Configuring Fluorescent Data (F-Panel for YMCFK Ribbon) using the Workbench (continued)
    • Configuring Fluorescent Data (F-Panel for YMCFK Ribbon) using the Workbench (continued)
    • Configuring Fluorescent Data (F-Panel for YMCFK Ribbon) using the Workbench (continued)
      • Configuring Fluorescent Data (F-Panel for YMCFK Ribbon) using the Application
        • Configuring Fluorescent Data (F-Panel for YMCFK Ribbon) using the Application (continued)
        • Configuring Fluorescent Data (F-Panel for YMCFK Ribbon) using the Application (continued)
• Section 13: Packing the Card Printer
• Section 14: Firmware Updates
  • Performing the Firmware Updates
    • Performing the Firmware Updates (continued)
    • Performing the Firmware Updates (continued)
    • Performing the Firmware Updates (continued)
    • Performing the Firmware Updates (continued)
    • Performing the Firmware Updates
• Section 15: Fargo Technical Support
  • Contacting Fargo Technical Support
  • Reading the Serial Numbers on a Fargo Printer
• Section 16: Reviewing Spare Parts Lists
  • Reviewing Spare Parts List for HDP5000 and HDP5000-LC
• Section 17: Glossary of Terms
  • Glossary of Terms (continued)
  • Glossary of Terms (continued)
  • Glossary of Terms (continued)
  • Glossary of Terms (continued)
  • Glossary of Terms (continued)
  • Glossary of Terms (continued)
  • Glossary of Terms (continued)
  • Glossary of Terms (continued)
  • Glossary of Terms (continued)
  • Glossary of Terms (continued)
  • Glossary of Terms (continued)
  • Glossary of Terms (continued)
  • Glossary of Terms (continued)
  • Glossary of Terms (continued)
  • Glossary of Terms (continued)
  • Glossary of Terms (continued)
  • Glossary of Terms (continued)
  • Glossary of Terms (continued)
  • Glossary of Terms (continued)
  • Glossary of Terms (continued)
• Section 18: Index