Flymo Sabre Cut - Manual (Page 5)

How to Use
Cutting Positions
1. To change cutting position, press the button
on the hedgetrimmer head (G1) and move
to the position required.
• Your Product has seven different cutting
positions (H), to enable high top cutting
(J), side cutting etc (K).
How to Use your Hedgetrimmer
1. Inspect area to be cut before each use -
remove objects which can be thrown or
become entangled in the cutting blades.
2. Always keep the Hedgetrimmer in front of
your body. Hold handle firmly with both
hands and stand in a secure and stable
position.
3. Allow the cutting blades to reach full speed
before entering the material to be cut.
4. Always work going away from people and
solid objects such as walls, large stones,
trees, vehicles etc.
5. If blade stalls, immediately stop the
Hedgetrimmer. Clear jammed debris from
the cutting blades. Inspect blades and
repair or replace as needed.
J
H
G
1
K