Flymo Sabre Cut - Manual (Page 6)

Caring for your Hedgetrimmer
Cleaning (L)
1. Using a soft brush - remove debris from all
air intakes and cutting blade.
2. Wipe over surface of your hedgetrimmer
with a dry cloth.
• IMPORTANT
Never use water for cleaning your hed-
getrimmer. Do not clean with chemicals,
including petrol, or solvents - some can
destroy critical plastic parts.
Lubricating the Cutting Blade
For easier operation and longer life, lubricate
the cutter blades before and after use. Apply
the oil so that it runs between the two blades.
See Pic M.
At the end of the Cutting Season.
1. Clean your Hedgetrimmer thoroughly.
2. Check that all nuts and bolts are secure.
3. Visually inspect the Hedgetrimmer for any
worn or damaged parts, contact your local
Service Centre if any parts require
replacement.
To store your Hedgetrimmer
1. Attach the Storage Holder to the wall with
the two screws provided (N)
2. Store the Hedgetrimmer Head in the holder
as illustrated in Fig P
• Store in a cool, dry place and out of
reach of children.
L
M
N
P