Fantom Vacuum FC285H - Manual (Page 15)

Projection
Groove
14
1
1
REPLACEMENT INSTRUCTIONS
REMOVING THE BOTTOM PLATE
Set the vacuum cleaner to the
parallel position and turn it over.
REATTACHING THE BOTTOM PLATE
Insert the projection on the bottom plate
into the groove on the nozzle housing
and set the bottom plate in place.
3 Turn the vacuum over
and place in the upright position.
2
2
Use a screwdriver to loosen
the screws on the bottom plate.
Lift the bottom plate off.
Tighten the screws by using a
screwdriver.
3
Loosen
Screws
Tighten
Screws
Bottom Plate