Fantom Vacuum FC285H - Manual (Page 6)

PREPARATIONS BEFORE USE
THERMAL SAFETY DEVICE IN MAIN BODY
To protect your vacuum cleaner motor from overheating, a thermal safety device has been
built in. If your vacuum cleaner hose or air intake clogs up with dust or dirt, or if your dust
bag becomes full and you continue to run the machine, the vacuum will shut off
automatically to prevent the motor from overheating. If this happens, turn off switch and
disconnect your vacuum from power outlet, remove the material clogging the machine
and let your vacuum cool down for approximately 45 minutes. You can then restart your
vacuum cleaner and use it again.
5
WINDING THE POWER CORD
1 Wind the power cord around
the cord storage hooks.
Secure the power
cord plug on the
power cord.
Cord Storage
Hooks
RELEASING THE POWER CORD
1 2 Rotate the upper cord
storage hook downward. Return the hook to the
upright position before
attempting to rewind
the power cord.
Upper Cord
Storage Hook
INSERTING THE POWER CORD PLUG
Insert the power cord plug into the
wall outlet.
Plug shown in figure may
differ from actual plug
attached to unit for
your area.