Fender 115sA Subwoofer - Manual (Page 3)

3/4” (1.9 cm) Oriented Strand Board
Cabinet
700W or 900W Program Power
Handling
48 Hz to 110 Hz (115sA) / 42 Hz to
110 Hz (118sA) Frequency Response
99 dB Sensitivity @ 1W / 1m
One 15” (38 cm) / 18” (46cm) Woofer
with 2.5” (6 cm) Voice Coil
High Current 1/4” Phone Jacks
Large Diameter Vents for Minimum
Air Turbulence
Thank you for purchasing an Artist Series
115sA/118sA Professional Subwoofer from Fender
Pro Audio. We know that your music is important to
you. With the addition of this subwoofer, your music
will be reproduced as it was meant to be...Full, well
rounded, and balanced throughout the frequency
spectrum.
Featuring one 15” (115sA) or 18” (118sA) woofer
with a 2.5 “ voice coil and parallel high current 1/4”
jacks that allow you to “daisy chain” other
subwoofers or full range speakers to your system.
The sA’s bandpass design naturally rolls off high
frequencies so there is no need to use a passive or
active crossover network in multi-speaker systems.
The single reflex enclosure design provides for high
sensitivity, high power handling and excellent low
frequency response.
Please read through this owner’s manual in order to
more thoroughly understand the operation, and
applications of your 115sA/118sA professional
subwoofer.
CAUTION: Almost all speakers produce strong
magnetic fields which may interfere with the
normal operation of nearby electronic devices,
including televisions and computer video
monitors. To reduce or eliminate interference,
increase the distance between this product and
other nearby electronic devices.
INTRODUCTION
ARTIST SERIES 115sA/118sA
PROFESSIONAL SUBWOOFER
LOUDSPEAKER
3