Fujitsu Siemens Computers E-6555 - Manual (Page 23)

23
SECURITY MENU – SETTING THE SECURITY FEATURES
The Security menu allows you to set up the data security
features of your notebook to fit your operating needs
and to view the current data security configuration.
Follow the instructions for Navigating Through
the Setup Utility to make any changes.
(See Navigating Through The Setup Utility on page 2 for
more information.)
The following tables show the names of the menu
fields for the Security menu and its submenus, all of
the options for each field, the default settings and a
description of the field’s function and any special
information needed to help understand the field’s use.
The default condition is no passwords required and
no write protection.
P O I N T
If you set a password, write it down and keep it in a
safe place. If you forget the password you will have to
contact your support representative to regain access to
your secured functions and data.
C A U T I O N
Entering a password incorrectly 3 times in a row will
cause the keyboard and mouse to be locked out and the
warning
[System Disabled] to be displayed. If this
happens restart the computer by turning off and on the
power with the power switch and use the correct
password on reboot.
P O I N T
If you make an error when re-entering the password
a
[Warning] will be displayed on the screen. To try
again press the Enter key and then retype the password.
Press the Esc key to abort the password setting process.
C A U T I O N
If the Power Management Security is Enabled and the
Password on Boot is Disabled you will not have to type
your password upon resuming the system from the
Suspend or Save-to-Disk modes. Power Management
Security will work only if Password boot is enabled.
P O I N T
Boot sector protection must be set to [Normal] to
install or upgrade an operating system.