Fortinet FortiGuard Analysis 1.2.0 - Manual (Page 37)

Management Device
FortiGuard Analysis and Management Service Version 1.2.0 Administration Guide
13-12000-406-20081031
37
Adding and editing devices
You can add devices to the contract or edit the daily volume and quota for a
device. Adding devices to a contract is available only if your contract allows it.
To add a device
1 Go to Management > Device.
2 In the Device section, select Add Device.
3 Enter the appropriate information for the following:
4 Select Submit.
Basic Information section
IP
The internal IP address of the device.
Time Zone The time zone associated with that device.
Firmware The current firmware image running on the device. The firmware
image is displayed in the format:
v<firmware_version>-<build_number>(<maintenance
release_number>).
Automatically
Upload Config The current action the device will take when a configuration is saved:
NO – the device will not automatically upload the configuration
YES – the device will automatically upload the configuration.
Select Change to change whether the device will automatically upload
a saved configuration or not.
Tasks section
Upgrade
Firmware
Upgrade the firmware on the device. For more information about
upgrading a device’s firmware, see “Changing firmware from the
device” on page 45 and “Changing firmware from the portal web site”
on page 44 .
Run Script Run a script file. For more information about scripts, see “Creating
scripts” on page 46 and “Running scripts” on page 43 .
Show Available
Firmware Displays all available firmware for the devices. For more information,
see “Viewing available firmware images” on page 44 .
Scheduled Task The name of the scheduled task.
Type The type of task that will be performed. There are three types: Config
(configuration upload), Script (running a script), and Firmware
(upgrading a firmware image).
Scheduled Time The date and time of when the schedule task will begin. The date and
time are in the format, yyyy-mm-dd hh:mm:ss.
Status The status of the scheduled task.
Action The action you can take to delete or edit a schedule. The Delete and
Edit icons appear after the schedule task starts.
Revision History section
The Revision History section provides a list of backed up
configurations. You can also compare configurations to view what
changed between revisions. For more information, see “Viewing
configuration revisions” on page 39 .
SN Enter the serial number of the device.
Quota (G) Enter the total amount of disk space that the device is allowed to
use.
Daily Volume (M) Enter the amount of disk space that the device is allowed to
consume per day.
Comments Enter any comments or descriptions for that device, if applicable.