Fujitsu Siemens Computers BX600 - Manual (Page 12)

Setting Up a BX600 Digital KVM Switch in Tiers Installation
6 590-673-501A
To display the BX600 Digital KVM Switch Main dialog box by slot order:
 Press Print Screen to launch OSCAR, the BX600 Digital KVM Switch interface.
 Click Setup and then click Menu. The Menu dialog box appears.
Figure 3: Menu Dialog Box
 Select Slot to display servers by slot number. Type a screen delay time of 1 sec-
ond.
 Click OK.
2.2 Setting Up a BX600 Digital KVM Switch in
Tiers
You can set up your BX600 Digital KVM Switch in tiers from our KVM appliances.
To connect the BX600 Digital KVM Switch to the supported KVM appliance:
NOTE: The supported KVM appliances can be: KVMs1-1602, KVMs2-0801, KVMs2-0411 or KVMs3-1621. Tiering
is limited to 2 levels: Level 1 is the BX600 Digital KVM switch. Level 2 is any of the KVM appliances mentioned
above.
 Place the BX600 blade chassis and the KVM appliance in the desired location.
Fujitsu Siemens recommends powering off and unplugging both appliances before
connecting them.
 Connect the keyboard, video, and mouse cable to the KVM appliance.
 Connect the other end of this cable to the Local KVM cable.
 Connect the Local KVM cable to the KVM port of the BX600 Digital KVM Switch
(Figure 4).
 Connect the power cords for both the KVM appliance and the BX600 blade chassis
to the appropriate socket on the back of the appliance.
 Connect both the KVM appliance and the BX600 blade chassis to an appropriate
power supply.
 Turn the power on for the BX600 blade chassis first; then turn the power on for the
KVM appliance.