Fujitsu Siemens Computers BX600 - Manual (Page 21)

Analog Operation Assigning Server Module Names
15 590-673-501A
Figure 9: Setup Dialog Box
3.4.1 Assigning Server Module Names
Use the Names dialog box to identify server modules by name rather than by slot
number. The Names list is always sorted by slot order.
To access the Names dialog box:
 Press Print Screen. The Main dialog box will appear.
 Click Setup and then click Names. The Names dialog box appears.
Figure 10: Names Dialog Box
NOTE: If the BX600 Digital KVM Switch System discovers new server modules, the on-screen list will automatically
update. The mouse cursor will change into an hourglass during the update and the system will not accept mouse or
keyboard input.
NOTE: The BX600 Digital KVM Switch stores the Server Module names. If you move a Server Module to a new slot
or chassis, the name will not move with it, so the module must be reassigned a name in the new location.
To assign names to server modules:
 In the Names dialog box, select the name or slot number you wish to change and
click Modify. The Name Modify dialog box appears.