FUJITSU M3099GH User Manual
Page 77
7-6
Valid
Invalid
Valid
Invalid
Valid
Invalid
Reading parameter
Reading
mode
●
●
DTC
●
●
Conversion
●
●
Tranfer
mode
●
●
Size
●
●
Sharpness
●
●
Transfer
rate
●
●
Portrait/
Landscape
●
●
Outline
extraction
●
●
Resdution
●
●
Picking
●
●
Overlay
●
●
Start of
reading
●
●
Document
selection
●
●
Simplified
DTC
●
●
Density
●
●
r patterns
●
●
Zooming
●
●
Line-art
/ Photo
●
●
Contrast
●
●
Halftone
●
●
Automatic
separation
●
●
Reading parameter
Reading parameter
• For patterns “1” to “5” when the power is turned on
Scanner checks that IPC-2 for front/back sides are installed during initialization.
If IPC-2 for either the font or back side is not installed, the scanner regards as no setting obligatory and
changes the memory of EEPROM.
• When IPC-2 pre-set is executed in setup mode
Scanner checks that IPC-2 for front/back sides are installed when the scanner enters in IPC-2 pre-set.
If IPC-2 for either the front or back side is not installed, the scanner does not enter in IPC-2 pre-set.
• When IPC-2 pre-set mode is executed
When IPC-2 pre-set mode is executed in online mode, the reading parameter is valid or invalid
(Host setting is invalid) as follows:
NOTE
15-Chap. (7)
98.2.20, 10:56 AM
6