FORD RACING M-6007-X302E - Manual (Page 12)

M-6007-X302E
340 HP Crate Engine
GUIDE
NO PART OF THIS DOCUMENT MAY BE REPRODUCED WITHOUT PRIOR AGREEMENT AND WRITTEN PERMISSION OF
FORD RACING PERFORMANCE PARTS.
Techline 1-800-367-3788 Page 12 of 13 IS-1850-0289
Factory Ford shop manuals are available from Helm Publications, 1-800-782-4356
• 9.0:1 compression ratio (nominal)
•
Forged pistons
• Forged steel connecting rods
• BOSS 4-bolt main block M-6010-BOSS302
•
Hydraulic roller camshaft M-6250-E303, .498" lift intake and exhaust, duration at .050" is 220 degrees intake
and exhaust
•
Double roller timing chain set M-6268-A302
• Forged steel crankshaft
• Rear sump pan fits most Fox body cars
•
Ford Racing aluminum GT-40 cylinder heads M-6049-X306 with 1.94" intake valves and 1.54" exhaust valves
•
Roller rocker arms M-6564-B351
• Built with all NEW parts
• Can be used in kit cars, street rods, Mustangs, Fox-bodied cars, and trucks
•
Depending on your application, a different timing cover, water pump, performance oil pan and pickup may be
required. See installation notes.
INSTALLATION NOTES:
See engine installation and tuning tips.
Some or all of the following items may need to be changed from your original engine or modified for
proper installation:
•
This engine has a rear sump oil pan and pickup, timing cover and reverse rotation water pump and EFI
valve covers.
•
A different performance oil pan and pickup may be required for your application. Call the Tech Line at
(800) 367-3788 for more information.
•
The timing chain cover will work with most standard rotation water pumps.
• Fuel pump eccentric M-6287-B302 installed, allows use of mechanical fuel pump.
•
A reverse rotation water pump is installed on the engine. Other applications may require different water pumps
and timing chain covers.