Fisher FVH-T610 - Manual (Page 10)

MULTIBRAND UNIVERSAL REMOTE CONTROL
For cable (CATV) converter/decoder or DSS
(Digital Satellite System) receiver operation
1 In the chart, find the code corresponding to your
brand of cable converter/decoder or DSS receiver.
2 While holding down the CATV/DSS button, press
2 number buttons (0 – 9) to enter the code.
The remote control is now set to operate your
converter/decoder or DSS receiver.
Cable converter/decoder
brands
Code
ARCHER 00, 01, 06, 29
CABLE CINEMA 01, 32
CABLETENNA 01, 32
CABLEVIEW 01, 32
CENTURY 00, 29
CITIZEN 00, 24, 29
CURTIS 19, 25, 32
DIAMOND 01, 32
EAGLE 15, 20, 36, 40, 41
EXPLORER 19, 32
GC ELECTRONICS 00, 11, 29
GEMINI 05
GENERAL ELECTRIC 01, 18
GENERAL INSTRUMENT 01, 05, 07, 09, 16, 28, 33, 65
GERRARD 00, 29
HAMLIN 12, 17, 37
HITACHI 13
JASCO 05
JERROLD 01, 05, 07, 09, 16, 28, 33, 65
MACOM 13
MAESTRO 30
MAGNAVOX 43
MATSUSHITA 08, 19, 21
NEC 20, 39
NEXT LEVEL 01, 05, 07, 09, 16, 28, 33, 65
NOVAVISION 19, 32
NSC 20, 39
OAK 04, 34
OAK SIGNA 04, 34
PANASONIC 08, 19, 21
PHILIPS 14, 31, 36, 40
PIONEER 06, 23
PULSER 05, 11
QUEST 06, 23
RADIO SHACK 00, 29
RCA 08, 19, 21
REALISTIC 00, 29
RECOTON 00, 29
REGAL 12, 17, 37
REMBRANDT 00, 11, 29
SAMSUNG 06, 11, 22
SCIENTIFIC ATLANTA 19, 25, 32
SHERITECH 44
SIGNAL 43
SL MARX 06, 11, 22
SPRUCER 08, 19, 21
Cable converter/decoder
brands
Code
STARGATE 05, 11, 22
SYLVANIA 38, 39
TEKNIKA 30
TELECAPTION 26
TELEVIEW 20, 22, 39
TEXSCAN 38, 39
TOCOM 01, 07, 10, 11
UNIKA 00, 11, 29
UNIVERSAL 00, 24, 27, 29
VIDEOWAY 02, 03, 14
VIEWSTAR 15, 20, 36, 40, 41
ZENITH 02, 03, 14
DSS receiver brands Code
DRAKE 77
HITACHI 70, 75
HUGHES 70, 75
MAGNAVOX 78, 79
OPTIMUS 78, 79
PANASONIC 73
PRIMESTAR 76
PROSCAN 71
RCA 71
SONY 72
TOSHIBA 74
UNIDEN 78, 79
NOTES:
œ Only remote-controlled products can be operated using
this remote control. (Refer to the instruction manuals
for your TV, CATV converter/decoder or DSS receiver
instruction manual for more details.)
œ There may be some TV, CATV converter/decoder or
DSS receiver models that cannot be operated with this
remote control. If this is the case, use the original
remote control supplied with your equipment.
œ Cable companies may charge an extra monthly fee to
activate the remote control feature of a rented CATV
converter/decoder. If this is the case, this remote
control will not operate the cable converter/decoder
unless such arrangements are made with the cable
company.
IMPORTANT NOTE: If the batteries in the remote
control are replaced, the codes for the TV , CATV
converter/decoder and DSS receiver must be reset.
Write your code numbers below for future reference.
TV: ______ CATV: ______ DSS: ______
Place the supplied label on the back of the remote control.
SC4H/UF (FVH-T610 GB) Fri. Jan., 07/2000
9