FORD P5064 - Manual (Page 10)

10
P5064pr-0922
ASSEMBLY
3
FRONT VIEW
• Rotate the seat back and lift to remove from the vehicle.
Seat
Vehicle
4
• Slide the rear axle assembly through the hole in one motor, the
back end of the vehicle and then out through the other motor.
Rear Axle Assembly
Hole in Motor
• Locate the motors inside the vehicle.
• Make sure each motor is positioned in the rectangular recesses
inside the vehicle.
TOP VIEW
5
Motors
Motors
6
BOTTOM VIEW
• Turn the vehicle upside-down.
• Slide the other rear wheel driver,
ring side out, onto the rear axle.
Make sure the rear wheel driver fits onto the pins in the motor.
• Slide a wheel, rib side in, onto the rear axle. Make sure the ribs
on the wheel fit into the grooves on the rear wheel driver.
• Slide a hubcap, peg side in, onto the rear axle.
Rear Wheel Driver
(Ring Side Out)
Rear Axle
Wheel
(Rib Side In)
Motor
Hubcap
(Peg Side In)