Problems and solutions guide – FORD P5064 User Manual

Page 27

Advertising
background image

27

P5064pr-0922

PROBLEMS AND SOLUTIONS GUIDE

PROBLEM

POSSIBLE CAUSE

SOLUTION

When the go foot pedal is

pressed, the vehicle won’t run

without a push

Loose wire or connector

Check all wires around the motors and all connectors to make

sure they are tight.

“Dead Spot” on motor

Contact your local Power Wheels

®

authorized service center for

diagnosis and repair.

Loud clacking or grinding noise

from a motor-gearbox

Broken gears

Contact your local Power Wheels

®

authorized service center for

diagnosis and repair.

Charger gets warm during use

It is normal for some chargers to get

warm during use and is not reason

for concern.

No action required.

If your charger does not get warm during use, it does not mean

that it is not working properly.

Battery makes a sizzling or

gurgling noise when charging

It is normal for some batteries to make

noise and swell slightly while charging

and is not reason for concern.

No action required.

If your battery does not make noise or swell slightly during

charging, it does not mean that it is not accepting the charge.

If, after reviewing the Problems and Solutions Guide, the vehicle still fails to operate, please contact your nearest authorized service

center or contact Power Wheels

®

Consumer Relations toll-free at 1-800-348-0751.

Advertising