Fostex HP-P1 - Manual (Page 8)

E-8
Various settings
When you enjoy music via headphones, make the
following settings appropriately depending on the
circumstance or your preference.
Adjusting the volume
You can adjust the headphone volume using the
power switch/volume control.
<Memo>:The power switch/volume control
only affects the headphone output level. It does
not affect the output level of the [LINE OUT]
jack.
Selecting the gain
You can select the gain of the headphone amplifier
using the [GAIN] switch.
There are three switch positions available. The
rightmost position provides the highest gain, while
the leftmost position provides the lowest gain.
Select the appropriate position depending on the
sensitivity of your headphones.
<Memo>:The [GAIN] switch only affects the
headphone output. It does not affect the [LINE
OUT] jack.
Turning on or off the power
Turning on the power
To turn on the power, follow the procedure below.
1. Make sure that all the connections between the
HP-P1 and external devices are made.
2. Make sure that the internal battery is charged or
the [DC-IN] port of the unit is USB-connected to a
personal computer.
3. Turn the power switch/volume control dial clock-
wise until it clicks.
The power is turned on. The power indicator lights
in red briefly and then turns to green.
If an iPod/iPhone is connected to the unit, the iPod/
iPhone is automatically turned on.
<Memo>:When the battery is exhausted, the
power indicator lights in red.
Turning off the power
To turn off the power, turn the power switch/volume
control dial counterclockwise until it clicks.