Fujitsu Siemens Computers 21P4 - Manual (Page 22)

Colour monitor 21P4
20 - English A26361-K886-Z100-1-5E19
Technical data
Dimensions and weight
CRT:
Visible diagonals:
Dot pitch:
Maximal resolution:
Dimensions (W x H x D):
Weight:
53 cm (21“)
50 cm
0.26 mm
1920 x 1440 pixels
504 mm x 506 mm x 482 mm
25.7 kg
Accessories: Power cable (1.8 m), Data cable (1.8 m)
Storable display modes: 18 (8 of which are preset)
Electrical data
Video:
Synchronisation:
Horizontal frequency:
Refresh rate:
Maximum pixel rate:
Power supply:
analogue, positive, 0.7 Vpp, 75 Ohm
TTL
30 kHz .... 115 kHz (multi-scanning)
50 Hz .... 160 Hz
320 MHz
100 V - 240 V
±
10%, 60 Hz/50 Hz
±
3 Hz, < 2 A
Power consumption (see power
management): < 120 W (ON, Normal mode)
< 3 W (OFF mode)
Environmental conditions
Environment class 3K2, IEC 721
Rated range of operation:
Humidity:
Limit range of operation:
Humidity:
10 °C .... 40 °C
10 % .... 80 %
0 °C .... 60 °C
5 % .... 90 %
Condensation must be avoided.
VESA-DDC-compatible VGA interface
Your monitor is equipped with a VESA-DDC-compatible VGA interface. VESA-DDC (Video
Electronics Standard Association, Display Data Channel) is used as the communications interface
between the monitor and the computer. If your computer is equipped with a VESA-DDC-compatible
VGA interface, it can automatically read the data for ensuring optimum operation from your monitor
and select the appropriate settings.
i
If the monitor 21P4 is not yet displayed in the list of monitors, you can select one of the
following monitors instead:
Fujitsu Siemens, Siemens or Siemens Nixdorf 21P3, 21T1, MCM 2110, MCM 2111