FUJITSU FMC-8FX FAMILY MB95F430 - Manual (Page 5)

5 / 18
Induction Heater C Library User Manual Version 1.2
MCU-AN-500087-E-12
3. System Introduce
3.1. Hardware Block Diagram
The electromagnetic eddy current heating is our system theory. We use the PWM to control
the IGBT to generate the heating eddy current. The fan is use to cool the IGBT. The feedback
signal is used to protect the system and calculate power.
3.2. MCU Resource Usage
MB95F434K Resource Usage
No. Resource Usage Info Remark
1 VCC 5.0V
2 ROM
3 RAM
4 OSC Clock 16.25MHz
5 CPU Clock 8.125MHz
6 GPIO 6 Pins LED COM(5),Start
7 INTxx 1 Pins (Internal) Pad osc
8 8/16Bit PPG(Timer) 1 Pins(PPG)
9 ANxx 4 Pins
10 UART0 LED Display
11 Debug 1 Pins
12 Watchdog Timer Monitor System
13 16Bit Timer0 Keyboard Sample
14 16Bit Timer1 10MS Timer Protect,Error
Figure-1 Hardware Block Diagram