FUJITSU ETERNUSmgr P2X0-0202-01EN - Manual (Page 31)

Chapter 2 Setup
>
2.4 Modifying the ETERNUSmgr Top Menu System
ETERNUS Disk storage systems ETERNUSmgr User Guide -Introduction-
31
Copyright 2009 FUJITSU LIMITED
P2X0-0202-04ENZ0
Procedure
1
Confirm the current Top Menu directory (specified during installation).
Make sure that all the necessary files (fujitsu.gif, index.htm, menu.htm, eternus.gif) have
been installed.
#ls /(current Top Menu directory)/www/
fujitsu.gif index.htm menu.htm eternus.gif
2
Copy all the Top Menu files to the new Top Menu directory.
#cp /(current Top Menu directory)/www/* /(new Top Menu directory)/
3
Confirm the copy results.
# ls /(new Top Menu directory)/
fujitsu.gif index.htm menu.htm eternus.gif
4
Edit the copied Top Menu file.
# vi /(new Top Menu directory)/menu.htm
End of procedure
2.4.1.2 ETERNUSmgr for Windows® Procedure
This section explains what to do for the Windows® versions of ETERNUSmgr. This procedure
shows how to change the top menu directory and then edit "menu.htm". If you are not going to
change the top menu directory, start from
Step 4 .
Procedure
1
Check the current Top Menu directory (specified during installation) with
Explorer.
Make sure that all the necessary files (fujitsu.gif, index.htm, menu.htm, eternus.gif) have
been installed.
2
Copy all the Top Menu files to the new Top Menu directory.
3
Confirm the copy results using Explorer.