FUJITSU M3096EX - Manual (Page 31)

4 – 4
4.2.3 Reading a document larger than the document board
If the size of the document is larger than the document board, read the
document using the following procedure:
①
Open the document cover at an angle of about 80
°
, then slide the
cover to the direction of the arrow to remove it.
②
Place the document face down on the document bed.
③
Place the document cover over the document.
④
Read the document.
⑤
After the read operation, remove the document, replace the
document cover. Mount the document cover to the original
position, and close the document cover.
NOTICE: Do not remove the document cover for any other purpose.
Figure 4.2 Removing the document cover
Document cover
Document bed
80
°