2 reading a document in flatbed mode, 1 reading a standard-size document, Reading a document in flatbed mode -2 – FUJITSU M3096EX User Manual
Page 29: Reading a standard-size document -2, Reading a document in flatbed mode
4 – 2
4.2
Reading a Document in Flatbed Mode
This section explains how to read a document placed on the document
bed.
4.2.1
Reading a standard-size document
If the size of the document is smaller than the document bed, read the
document using the following procedure:
①
Open the document cover.
②
Place the document face down on the document board. Correct
any curled or folded parts of the document.
③
Position the long side (in landscape mode) or the short side (in
portrait mode) of the document to the left side of the document
bed.
④
Position the left top of the document to the reference mark. If the
document is not placed correctly, reading cannot be done cor-
rectly.
⑤
Close the document cover slowly. If the document cover is
closed too quickly, the document may move.
⑥
Start the read operation. Do not press on or open the document
cover during the read operation.
⑦
After reading, open the document cover to remove the document.