Furuno AIS Transponder FA-50 - Manual (Page 19)

1. INSTALLATION
1-9
Note: Be sure no foreign material or water enters the distributor.
1.6 AC-DC Power Supply (option)
When selecting a mounting location for the unit, keep the following in mind:
z Keep the unit out away from areas subject to water splash.
z Locate the unit away from exhaust pipes and vents.
z The mounting location should be well ventilated.
z Mount the unit where shock and vibration are minimal.
z A magnetic compass will be affected if the unit is placed too close to it. Observe the
following compass safe distances to prevent disturbance to the magnetic compass:
• Steering compass: 0.6 m
• Standard compass: 0.9 m
Fix the unit with four self-tapping screws (4x16) to a desktop or the deck. It is not nec-
essary to open the cover.
Self-tapping screw
(4x30)