FUJITSU T5440 - Manual (Page 167)

Servicing Field-Replaceable Units 145
Related Information
■ “Safety Information” on page 63
■ “Servicing Power Supplies” on page 89
■ “Servicing the Power Distribution Board” on page 130
■ “Servicing the Hard Drive Backplane” on page 135
■ “Servicing the Motherboard” on page 139
▼ Remove the Flex Cable Assembly
Before you begin, complete these tasks:
■ Read the section, “Safety Information” on page 63 .
■ Power off the server, using one of the methods described in the section, “Powering
Off the System” on page 67 .
■ “Extend the Server to the Maintenance Position” on page 70
■ “Perform Electrostatic Discharge – Antistatic Prevention Measures” on page 73
■ “Remove the Top Cover” on page 73
Do the following:
1. Unplug the power cords.
2. Remove the flex cable retainer.
Loosen the captive No.2 Phillips screw and lift the retainer up and out of the
chassis.