Fujitsu Siemens Computers 5110 FA - Manual (Page 14)

Colour monitor 5110 FA
12 - English A26361-K872-Z100-1-5E19
Monitor settings with the buttons of the control panel
2 3 1
A B
4
1 = Headphones port
2 = Buttons for the OSD menu
(On-Screen-Display)
3 = Power indicator
4 = Power button
Use the buttons of the control panel to make the following monitor settings directly while the OSD
menu is switched off.
Adjusting contrast, brightness and volume
Ê Press the 6 or 5 button to activate the setting window for contrast, brightness and volume.
Ê Use the B button to select the function you want to set.
Ê Press the 6 or 5 button to adjust the selected function.
Ê Press the A button to exit the setting window.
Selecting input signal
The monitor can be operated with analogue or digital signals. You can switch between the analogue
and the digital mode (depending on the graphics card you use).
Ê Press the B button to change the mode of the input signal.
Monitor settings using the OSD menu
With the buttons on the control panel, call up and use the integrated OSD (On-Screen Display)
menu.
i
The OSD menu is available in different languages. The English menu names are used in
the following description (default setting). With the OSD function
LANGUAGE SELECT in
the SETUP MENU you can select another language.