Fujitsu Siemens Computers 5110 FA - Manual (Page 16)

Colour monitor 5110 FA
14 - English A26361-K872-Z100-1-5E19
Adjusting the brightness and contrast
Calling the CONTRAST / BRIGHTNESS setting window
Setting the contrast of the display ( CONTRAST )
This function allows you to modify the contrast of bright colour tones.
Setting the brightness of the display ( BRIGHTNESS )
This function allows you to change the brightness of the background
lighting.
i
If the contrast is set too high, bright surfaces can no longer be distinguished from very
bright surfaces. If the contrast is set too low, the maximum brightness will not be
achieved.
Adjusting size and position
Calling the IMAGE ADJUST setting window
Performing auto-adjustment ( AUTO TUNE )
The optimal values for the functions H./V. POSITION , H. SIZE and PHASE
are automatically set during the auto-adjustment.
Adjusting picture position ( H./V. POSITION )
The B button enables you to change over between H. POSITION and V.
POSITION .
Adjusting the horizontal size ( H. SIZE )
There is an optimum setting for every resolution.
Eliminating picture interference ( PHASE )
This function enables the fine tuning of your monitor in case of picture
interferences.
Setting zoom display ( ZOOM )
This function allows you to enlarge a section of the display.