First Alert 2.5Color LCD Portable Wireless Family Monitor DWB-740 - Manual (Page 9)

Setting Up Your DWB-740 Family Monitor
Model DWB-740 User's Manual
9
S e t t i n g U p Y o u r
D W B - 7 4 0 F a m i l y M o n i t o r
G
ENERAL
P
RECAUTIONS
n
Do not place any of the equipment near a radiator, vent, or other place
where it might be exposed to heat, moisture, dust, vibrations, or strong
magnetic fields. If any liquid comes into contact with the monitor, turn off the
power immediately and have a qualified technician inspect the equipment
before using it again.
n
Only use 5V/1A power adapter provided in this package
n
When installing the camera, follow equipment manufacturer’s advice when
using power tools, steps, ladders, etc. and wear suitable protective
equipment (e.g., safety goggles) when drilling holes. Before drilling holes
through a ceiling, check for hidden electricity cables and water pipes.
P
OWERING THE
C
AMERA
DC Power Supply Mode
1
Connect the power cable to the DC IN of the camera.
2
Plug the power supply into the electrical outlet.
3
Press POWER button to turn on the camera.
Battery Power Supply Mode
1
Insert 3 AAA alkaline batteries making sure the
polarity is correct.
2
Press POWER button to turn on the camera.
C
HARGING THE
R
ECEIVER
1
Connect the power cable to the DC IN of the camera.
2
Plug the power supply into the electrical outlet.
3
Press POWER button to turn on the camera. A Green light on front panel indicates
the receiver is powered. Plug in power adapter to charge when [Battery Indicator]
lights up red.