Fostex VR800 - Manual (Page 14)

14
VR800 Quick Operation Guide
SCENE MEMORY REC BUSS
EFF EDIT SELECTED EQ EQ/HI EQ/HI-MID EQ/LO-MID EQ/LO SETUP
CURRENT SCENE STATUS
KEY MODE
+10
0
-10
-20
-30 -40
-
+10
0
-10
-20
-30 -40
-
+10
0
-10
-20
-30 -40
-
+10
0
-10
-20
-30 -40
-
+10
0
-10
-20
-30 -40
-
+10
0
-10
-20
-30 -40
-
+10
0
-10
-20
-30 -40
-
GAIN
FREQ
PAN
Q
PAN
ON ON ON ON ON ON ON
SOLO SOLO SOLO SOLO SOLO SOLO SOLO
EQ EDIT EQ EDIT EQ EDIT EQ EDIT EQ EDIT EQ EDIT EQ EDIT EQ EDIT
SOLO
ON ON
SOLO
EQ LIBRARY
STORE RECALL
EQ ON
EFF LIBRARY
STORE RECALL
EFF2 EFF1
STORE RECALL SOLO
+1/ /-1
DATA EXIT
ENTER
FREQ Q FREQ Q FREQ Q
GAIN GAIN GAIN
1-8 ANALOG IN 9-16 ADAT IN 17-20 EFF RTN PAGE SELECT
SYSTEM MIDI
PHASE GROUP ROUTING/ PAIR/
CH VIEW METER CHANNEL/
+10
0
-10
-20
-30 -40
-
0
-10
-20
-30
-60
-
-40
MMC SEND
PAN PAN PAN PAN PAN PAN
-40
-36 -24
-18 -12 -9
-6 -3
OL
ST BUSS/SOLO L R
METER
POWER AC IN OUT IN
MIDI
IN OUT
DATA
SCSI WORD OUT OPTICAL
Connecting a mixer
The VR800 is a digital multitrack recorder that provides 8-track recording, and is designed to connect to a
digital mixing console equipped with adat digital I/O. You can connect adat I/O connectors from a digital
mixer to the DATA IN/OUT connectors on the VR800 using optical cables. You can also connect an analog
mixer via an optional Model VC-8 (ADAT/ANALOG converter).
<Note>
Be sure to turn off the power to all devices before connecting the mixing console.
AC outlet
Current Drive
VR800
Digital Mixer
adat out adat in
<Notes for using a digital mixer>
* If a digital mixer has a WORD IN connector, be sure to connect the WORD OUT connector on the VR800 to the WORD IN
on the digital mixer as shown in the figure above.
* The default clock setting for the VR800’s digital-in is “asynchronous (ASYnC).” To make recordings on the VR800
connected to a digital mixer, you should usually set the VR800’s clock to “asynchronous” and the digital mixer clock setting
to “word (or digital-in).” If the VR800 is connected to WORD IN on the mixing console, set the clock to “WORD.”
If the console is not equipped with WORD IN, select “digital-in.”
In this connection example, the Vari-pitch function of the VR800 is also enabled.
To edit the digital-in clock setting, use the “Digital input track setting” menu in SETUP mode. (Refer to the <Note> on the
next page.)
Digital Mixing console VR800
Digital-in clock:
Asynchronous (default)
Clock setting:
Word (or digital-in)
clock
Word in
CAUTION
Connecting a digital mixer equipped with adat I/O
Connect adat I/O connectors from a digital mixer to the DATA IN/OUT connectors on the VR800 using
optical cables.