Example, Pin-init <string, Wireless-custom-vendor-id <hex_string – Fortinet FortiGate 60B User Manual

Page 43: Wireless-custom-product-id <hex_string

Advertising
background image

Configuring the modem interface

Configuring the modem using the CLI

FortiGate-60B FortiOS 3.0 MR6 Install Guide
01-30006-0446-20080910

43

Example

This example shows how to enable the modem and configure the modem to act
as a backup for the WAN1 interface. Only one dial-up account is configured. The
FortiGate unit and modem will attempt to dial this account 10 times. The FortiGate
unit will wait 5 seconds after the WAN1 interface recovers before switching back
to the WAN1 interface.

phone1
<phone-number>

Enter the phone number required to

connect to the dialup account. Do not

add spaces to the phone number.

Make sure to include standard special

characters for pauses, country codes,

and other functions as required by your

modem to connect to your dialup

account.

No default.

phone2 <phone-number>

Enter the phone number required to

connect to the dialup account. Do not

add spaces to the phone number.

Make sure to include standard special

characters for pauses, country codes,

and other functions as required by your

modem to connect to your dialup

account.

No default.

phone3 <phone-number>

Enter the phone number required to

connect to the dialup account. Do not

add spaces to the phone number.

Make sure to include standard special

characters for pauses, country codes,

and other functions as required by your

modem to connect to your dialup

account.

No default.

pin-init <string>

Enter additional pin initialization strings

that may be required for a proper

connection.

No default

priority <integer>

Enter the priority of learned routes on

this interface.
Valid priorities are from 0 to

4294967295.

0

redial <tries_integer>

Set the maximum number of times (1-

10) that the FortiGate unit dials the ISP

to restore an active connection on the

modem interface. Select none to allow

the modem to redial without a limit.

No default.

status
{disable | enable}

Enable or disable modem support. This

is equivalent to bringing an interface up

or down.

disable

username1 <name_str>

Enter the user name used to access

the specified dialup account.

No default.

username2 <name_str>

Enter the user name used to access

the specified dialup account.

No default.

username3 <name_str>

Enter the user name used to access

the specified dialup account.

No default.

wireless-custom-vendor-id
<hex_string>

Enter the wireless modem vendor ID

as a hexadecimal number.

No default

wireless-custom-product-id
<hex_string>

Enter the wireless modem product ID

as a hexadecimal number.

No default

Keywords and variables

Description

Default

Advertising