2introduction, Introduction, Important information – FireplaceXtrordinair 864 HH User Manual

Page 2: Installation warnings

Advertising
background image

2

Introduction

© Travis Industries

4080218

100-01181_003

Introduction

We welcome you as a new owner of a 864 Home Heater (HH) gas fireplace. This manual details
operation and maintenance of this fireplace. Please familiarize yourself with the Owner's Manual
before operating your heater and save the manual for future reference.

Important Information

No other 864 HH gas fireplace has the same serial
number as yours. The serial number is on the listing
label that is chained to the gas control valve. This
serial number may be needed in case you require
service.

Model:

864 HH Fireplace

Serial Number:

Purchase Date:

Purchased From:

Register your warranty online at:

traviswarranty.com

Or, mail your warranty card to:

Travis Industries House of Fire
4800 Harbour Pointe Blvd. SW
Mukilteo, WA 98275

Save Your Bill of Sale.

To receive full warranty coverage, you will
need to show evidence of the date you
purchased your heater. Do not mail your
Bill of Sale to us.

We suggest that you attach your Bill of
Sale to this page so that you will have all
the information you need in one place
should the need for service or information
occur.

Installation Warnings

Installation requirements are printed in the 86 HHV Installation Manual (part # 100-

01182). All requirements in the installation manual must be met.

Failure to follow all of the requirements may result in property damage, bodily injury,

or even death.

This heater must be installed by a qualified installer who has gone through a training

program for the installation of direct vent gas appliances.

This appliance must be installed in accordance with all local codes, if any; if not,

follow ANSI Z223.1 and NFPA 54(88).

In Manufactured or Mobile Homes must conform with Manufactured Home

Construction and Safety Standard, Title 24 CFR, Part 3280, or, when such a standard
is not applicable, the Standard for Manufactured Home Installations, ANSI/NCSBCS
A225.1. This appliance may be installed in Manufactured Housing only after the home
is site located.

The fireplace is designed to operate on natural gas, or propane (LP).

All exhaust gases must be vented outside the structure of the living-area.

Combustion air is drawn from outside the living-area structure.

Notify your insurance company before hooking up this fireplace.

Advertising