Fisher & Paykel Smartload DEGX1US - Manual (Page 15)

Fitting the front feet
Note: Dryer is usually supplied with feet fitted and protruding the correct distance.
1. Tilt the dryer back using a hand trolley and making sure the trolley and dryer are secure.
2. Fit a rubber insert to each plastic foot as shown.
3. Screw the feet into the foot retainers on the left hand and right hand sides as shown.
4. Screw both feet in so they protrude ¹⁄₂” (12mm) below the bottom of the wall on the foot
retainers.
14 15