Franklin Rolodex RF-4-96PC - Manual (Page 28)

This organizer uses one CR-2032 lithium battery.
Before you follow these steps you should have a
small Phillips screwdriver and the new battery at
hand.
Warning! When no battery is installed, this organizer
will save your information for only about 30 seconds.
So install the new battery quickly when you remove
the old one.
1. Turn the organizer off and turn it over.
2. With the Phillips screwdriver, remove the
screw to the battery cover and then remove the
lid.
Do not remove the screws at the sides of the
organizer.
3. Remove the old battery and quickly replace it
with the new battery, with the positive (+) side
up.
4. Replace the battery cover.
Warning! This organizer stores your information
as long as the battery supplies power. If the bat-
tery loses power or is removed, all your informa-
tion will be lost. Always keep written copies of your
important information in case it is corrupted or lost.
27
Replacing the Battery
This unit may change operating modes due to Electro-static
discharge. Normal operation of this unit can be re-established
by pressing the reset key, ON/OFF or by removing/replacing
batteries.