Cooktop & installation manual, Model cogb english, Mobile home installation – FCI Home Appliances COGB 33060/L/BL User Manual

Page 6

Advertising
background image

Cooktop & Installation Manual

Model COGB

ENGLISH

6

Mobile Home Installation

The installation of this cooktop must conform to the
Manufactured Home Construction and Safety
Standards, Title 24 CFR, Part 3280 (formerly the
Federal Standard for Mobile Home Construction and
Safety; Title 24 HUD part 280); or when such standard
is not applicable, the Standard for Manufactured
Home Installations (Manufactured Home Sites,
Communities and Setups), ANSI A225.1 - latest
edition, or with local codes.

In Canada, the installation of this cooktop must
conform with the current standards CAN/CSA-Z240 -
latest edition, or with local codes.

NOTE:

• If cabinet has a drawer, a 5-1/4"(13,35 cm) depth

clearance from the top of the countertop to the top
of the drawer (or other obstruction) in base
cabinet is required. The drawer depth may need
to be shortened to avoid interfering with the
regulator.

• 24" (61 cm) min. clearance if bottom of wood or

metal cabinets is protected by not less than 1/4"
(0.6 cm) flame retardant millboard covered with
not less than No. 28 MSG sheet steel 0.015" (0.04
cm) stainless steel, or 0.024" (0.06 cm) aluminium
or 0.020" (0.05 cm) copper. 30" (76.2 cm) min.
clearance between top of cooking platform and
bottom of unprotected wood or metal cabinet.



WALL COVERING CABINETS,
AND COUNTERTOP MUST
WITHSTAND HEAT UP TO 200 °F

13" (33 cm) MAX DEPTH
OF UNPROTECTED

OVERHEAD CABINETS

MIN 30" (76.2 cm)

30" (76.2 cm) MIN (see NOTE)

CLEARANCE FROM COUNTERTOP

TO UNPROTECTED OVERHEAD SURFACE

18" (45.7 cm) MIN HEIGHT FROM

COUNTERTOP TO NEAREST

CABINET ON EITHER SIDE OF UNIT

003

5" (12.7 cm) MIN

CLEARANCE FROM CUTOUT

TO SIDE WALL ON THE LEFT

AND RIGHT OF THE UNIT

Figure 3. Cutout requirements

GAS OPENING FOR COOKTOP INSTALLATION

OVER BUILT-IN OVEN 2-9/32" (6 cm) FROM REAR

CORNER OF CUTOUT TO HOLE

4-25/32" (12.15 cm) FROM TOP
OF COUNTERTOP TO HOLE

(HOLE DIAMETER 1-1/5")(3 cm)

2-19/32" (6.55 cm) OF RIGHT

REAR CORNER OF CUTOUT

2-9/32" (6 cm) FROM THE

BACK CORNER OF CUTOUT

ELECTRICAL OUTLET

12" (30.5 cm) BELOW FROM BOTTOM
OF COUNTERTOP

004

Figure 4. Gas and Electrical Line Opening

Advertising
This manual is related to the following products: