FujiFilm FINEPIX EX3.1 - Manual (Page 18)

35
1
2
3
4
34
6
Acrobat Reader installation 6
2
3
4
Check this before you start the installation.
Ensure that your Macintosh hardware and software meet the system
requirements for the software to be installed.
Install FinePixViewer and restart your Macintosh.
Connect the camera in DSC mode.
Disconnect the camera in DSC mode.
Installing the Software on Mac OS X
The CD-ROM includes software for Mac OS 8.6 to 9.2 and for Mac OS X. This
chapter describes the installation and setup procedures for Mac OS X.
You must install Adobe Systems’ Acrobat Reader software to read the
FinePixViewer User’s Guide (PDF).
If you already have the latest version installed, this step is not required.
1. Double-click the “Installer for MacOS8.6–9.x” icon to launch
the installer.
2. A confirmation message appears asking whether you want to
continue with the installation. Click the [OK] button.
3. The installer setup window appears.
Click the [Install Acrobat Reader] button.
4. Install Acrobat Reader as directed by the on-screen
instructions.
This completes the installation of all the software
components. Now proceed to “Using FinePixViewer” on
page 41.
When you have installed all the software...
Once you have finished installing all the software components, remove the CD-ROM.
You will need this CD-ROM if you ever have to re-install any of the software, so keep it
in a safe place away from dampness and out of direct sunlight.
1