FujiFilm FINEPIX EX3.1 - Manual (Page 45)

If your camera has a PC Camera function, you can download live images to
your Macintosh.
1. Switch the camera on and select “PC CAM”
as the USB setting.
2. Connect the camera to your Macintosh.
• Always use the correct procedure when disconnecting the camera from your Macintosh
or switching the camera off.
• Do not perform any of the following when the camera is connected to a Macintosh as
this may cause the Macintosh to freeze:
Disconnect the USB cable or AC power adapter / Touch the camera controls (power
switch, control buttons, lens cover or slot cover)
3. Double-click the “VideoImpression 1.6FP” icon in the
installation folder.
4. When the startup screen appears,
click the [new] button.
5. When the album window opens,
click the [capture] button.
NOTE
89 88
6. The Capture window appears and
the live image is displayed.
✽ Recording has not yet started.
To rotate a live image, click the “Source”
button and specify a rotation angle in the
“Roll” setting in the “Camera Controls” tab
sheet.
7. Click the [Capture Video] button to begin recording the
movie.
☞ The name of the button changes to [Stop Capture]. During recording, only the
[Stop Capture] button can be pressed.
8. Click the [Stop Capture] button to stop recording. The movie
data will be automatically saved to a file and imported to the
Album.
9. Click the [Done] button to
return to the Album window.
• You must have a sound card installed and speakers and a microphone connected to
your Macintosh to input and output sound.
• The time required for playing and saving images varies depending on the
performance of your Macintosh.
• Do not perform any of the following while live camera images are being displayed as
this could cause your Macintosh to freeze:
Switch off the camera/Touch any of the control buttons on the camera/ Disconnect
the USB cable/Remove the SmartMedia/Open the SmartMedia cover/ Remove the
camera battery/Put your Macintosh to sleep.
■ Disconnecting the Camera from your Macintosh
1. Exit “VideoImpression”. If you are using any other applications
that display live images, exit those applications also.
2. Switch the camera off.
NOTE
TIP
<Standby> <Movie recording in progress>
q
See “Connection” in
the camera Owner’s
Manual.
Capturing Live Images (Mac OS 8.6 to 9.2)
q
q
See “Connection” in
the camera Owner’s
Manual.